CAMX Show Directory & Program 2025

theCAMX.org

COMBINED STRENGTH. UNSURPASSED INNOVATION.

ORANGE COUNTY CONVENTION CENTER ORLANDO, FL SEPTEMBER 8-11 2025 theCAMX.org

PRODUCED BY

OFFICIAL MEDIA PARTNER

SHOW DIRECTORY & PROGRAM

Forming the Future. B CLOSED MOLDING REINFORCED THERMOPLASTICS See LIVE demos in Booth J33 at

PRESENTED LIVE BY COMPOSITES

By Air. By Land. By Sea.

at

2025 . INFUSED TOOLING AND MORE

S

S ONE AND INDUSTRY PARTNERS.

TABLE OF CONTENTS

Show Policies Registration Badges ........................................................................... 15 Photography and Videography........................................................ 15 Antitrust Guidelines ........................................................................... 15 Age Restrictions.................................................................................. 15 Phones .................................................................................................. 15 Weapons .............................................................................................. 15 Harassment .......................................................................................... 15 ASSOCIATION MEETINGS AND EVENTS ACMA Events ....................................................................................... 16 SAMPE Meetings & Events ................................................................ 17 Exhibitor Hall Highlights Exhibitor Demonstrations and Presentations ............................... 26 The Hive – Booth A42 ......................................................................26 Podcasting .....................................................................................26 Ask the Experts.............................................................................. 26 Networking ........................................................................................27 CSP Networking Lounge – Booth H27 ............................................27 Award Pavilons ..................................................................................27 CAMX Awards – Booth V47 ..........................................................27 ACE Awards – Booth V89..............................................................27 CAMX Theater – Booth J83 ...............................................................28 CAMX Floor Plan ................................................................................ 30 Exhibitor Products ..............................................................................32 Exhibitor Listings ............................................................................... 46 THANK YOU To Our Sponsors & Partners ............................................................. 54 Advertisers Index................................................................................55 CONFERENCE PROGRAM Conference Program by Track .......................................................... 17 EXHIBITORS

Welcome to CAMX 2025......................................................................2 About CAMX, ACMA & SAMPE............................................................4 Schedule at a Glance ............................................................................5 CAMX Events Overview .......................................................................6 Program Volunteers .............................................................................8

FIND YOUR WAY Hotel Map ............................................................................................. 10

GENERAL INFORMATION Getting To CAMX

Transportation/Parking ..................................................................... 12 Orlando Information ..........................................................................12 When You Arrive Registration & Hours .......................................................................... 13 Accessibility And Inclusivity Dietary Requirements ........................................................................ 13 Mother’s Lounge ................................................................................. 13 Inclusive Restroom ............................................................................. 13 Cashless Building ................................................................................ 13 Mobility Services ................................................................................. 13 While You’re At CAMX Attire ..................................................................................................... 14 Download the CAMX App..................................................................14 Stay Connected to CAMX on Social Media .....................................14 Housing/Hotel Reservation Assistance........................................... 14 Food Concessions ............................................................................... 14 Water Bottle Fill Stations ..................................................................14 Wireless Access................................................................................... 14 Bag/Coat Check .................................................................................. 14 Lost & Found........................................................................................ 14 Business Center................................................................................... 14 Safety, Security and Emergency Information ................................ 14 Smoking ............................................................................................... 14

1

theCAMX.org

CAM X 2025

2025

WELCOME TO CAMX 2025

On behalf of the CAMX volunteers and staff, we’re thrilled to welcome you to Orlando for this year’s Composites and Advanced Materials Expo. Whether this is your first CAMX or your 11 th , your presence here is what makes this event such a dynamic and meaningful gathering. This year’s event brings together a robust and diverse community of innovators, engineers, manufacturers, suppliers and thought leaders from around the world. With more than 500 exhibitors showcasing the latest technologies, products and services, the Exhibit Hall is your gateway to discovery. Be sure to visit The Hive , a newly designed interactive space for learning, networking and inspiration , and the CAMX Awards Pavilion to see some of the most groundbreaking innovations in composites and advanced materials. Our comprehensive conference program features cutting-edge technical presentations, expert-led tutorials and in-depth education sessions designed to help you stay ahead of trends and challenges. We’re especially excited to open CAMX with a keynote presentation by Sheryl Connelly , former chief futurist at Ford Motor Co. In her talk, “Unlocking Tomorrow: How Innovation is Shaping the Future of Manufacturing,” Connelly will explore how global trends intersect with business, design and technology — and what it means for the future of manufacturing and materials. To make the most of your time at CAMX, be sure to download the mobile app and access the MyCAMX Planner . You can use it to browse the schedule, build a personalized calendar, tag exhibitors you don’t want to miss and stay updated with real-time changes. When you’re ready to take a break, Orlando offers countless ways to unwind — from award-winning dining and vibrant nightlife to unique entertainment options and theme parks just minutes away. As you engage with the program, explore the Exhibit Hall and make new connections, we invite you to share your experience on social media using the #CAMX2025 hashtag. Your insights help capture the spirit of CAMX and the energy that fuels this industry, and we thank you for being part of the community. We look forward to seeing you throughout the week — and especially on the show floor.

Best, Eric Howard CAMX Chair

2

SEPT 8-11, 2025 / ORLANDO, FL

CAM X 2025

Investing in People, Research and Technology

With our strong investment in research and development and culture of continuous improvement, Hexcel is the industry leader in the manufacture of carbon fibers, composite materials and engineered products. Look behind the scenes of our new Center of Research and Technology Excellence to see the people creating the world’s most advanced lightweight material solutions.

Watch Now

Visit us at BOOTH F17

Join the Team! Hexcel Salt Lake City is home to the company’s high-performance carbon fiber manufacturing facility and U.S. aerospace matrix operation, as well as its Center of Research and Technology Excellence.

2025

CAMX ORGANIZERS

About CAMX CAMX — The Composites and Advanced Materials Expo — is the one source for connecting and advancing all aspects of the world’s composites and advanced materials communities: R&D, engineering, manufacturing, service providers and end users. Regardless of the application — transportation, aerospace, marine, wind energy, software, construction and infrastructure, medical, academics or sports and leisure — CAMX is America’s go-to event in the U.S. for the global composites and advanced materials communities. It provides a venue for companies and individuals to grow business opportunities, develop industry skills, understand their potential impact on the industry and new markets, and showcase new innovations in products and technology.

SAVE THE DATE: CAMX 2026 (Atlanta, GA) September 21-24, 2026 CAMX 2027 (Anaheim, CA) October 18-21, 2027

About SAMPE The Society for the Advancement of Material and Process Engineering (SAMPE), a global professional member society, provides the latest information on new materials and processing technology via in-person and online technical meetings, journal publications, webinars, workshops and conferences in which professionals can exchange ideas and present their views. As the only technical society encompassing all fields of endeavor in materials and processes, SAMPE provides a unique and valuable forum for industry leaders, scientists, engineers and academicians. To learn more and become a member, visit www.sampe.org or visit the SAMPE Booth F83 . About ACMA The American Composites Manufacturers Association (ACMA) is a leading composites industry trade group. By delivering invaluable education and events, access to market intelligence and by working with regulators and legislators, ACMA serves as the center of expertise and competence and an essential driver of industry growth. ACMA represent the entire North American supply chain including manufacturers, suppliers, distributors, academic institutions and a liates. Its members are in 49 states as well as located in Canada, Mexico and internationally. ACMA’s purpose is to help composites manufacturers prosper by supporting the industry in delivering composite technologies that make structures more durable, transportation more e cient, and consumer and industrial goods higher performing while minimizing their environmental footprint and supporting the workforce that delivers them. ACMA is committed to supporting the industry on this journey as we all work to make composites the sustainable material of preference and enable a better future for our members, partners and society. To learn more and become a member, visit www.acmanet.org or visit the ACMA Booth R83 .

4

SEPT 8-11, 2025 / ORLANDO, FL

CAM X 2025

SCHEDULE AT A GLANCE

Exhibit Hall Hours Tuesday, September 9 th Wednesday, September 10 th Thursday, September 11 th

All events are held at the Orange County Convention Center (OCCC) West Building unless otherwise noted.

10:00 A.M. – 5:00 P.M. 9:00 A.M. – 5:00 P.M. 9:00 A.M. – 1:00 P.M.

Sunday, September 7 th 1:00 P.M. - 4:00 P.M.

Monday, September 8 th 8:00 A.M. - 4:00 P.M. Registration Open (Lobby C, Level 2) 8:00 A.M. - 5:00 P.M. Exhibitor Move-In (Halls B – C, Level 2) (209A, 209C, Level 2) 5:00 P.M. – 7:30 P.M. SAMPE Awards Ceremony & Reception (Tangerine Ballroom, Level 2) 5:30 P.M. – 7:30 P.M. ACMA Membership Awards Ceremony & Reception (Florida Ballroom, Hyatt) 9:00 A.M. – 4:00 P.M. Pre-Conference Tutorials

Wednesday, September 10 th 7:00 A.M. - 5:00 P.M.

Registration Open (Lobby C, Level 2)

Registration Open (Lobby C, Level 2) 9:00 A.M. - 12:00 P.M.

Thursday, September 11 th 8:00 A.M. - 1:00 P.M. Registration Open (Lobby C, Level 2) 9:00 A.M. - 10:00 A.M. Good Day, CAMX (CAMX Theater, Booth J83, Hall B) 9:00 A.M. - 1:00 P.M. Exhibit Hall Open (Halls B – C, Level 2) 10:00 A.M. - 12:00 P.M. Conference Programming (CAMX Theater, Booth J83, Hall B) 12:00 P.M. – 5:00 P.M. Post-Event Field Trips/O -Site Tours (Meet in Lobby C) Conference Programming (Rooms 206 – 209, Level 2) 1:00 P.M. - 2:00 P.M. Poster Awards – Meet the Authors (Lobby B Concourse, Level 2) 1:30 P.M. - 5:00 P.M. Conference Programming (Rooms 206 – 209, Level 2) 4:00 P.M. - 5:00 P.M. Young Professionals Meet-Up (The Hive, Booth A42, Hall B)

Tuesday, September 9 th 7:00 A.M. - 5:00 P.M. Registration Open (Lobby C, Level 2) 7:45 A.M. - 8:30 A.M. First-Time Attendee Orientation (W314, Level 3) 8:30 A.M. - 10:00 A.M. General Session With Keynote Address (Valencia Ballroom, Level 4) 11:00 A.M. - 12:00 P.M. Ask the Experts (The Hive, Booth A42, Hall B) 12:00 P.M. - 1:00 P.M. CAMX Award Winner Presentations (CAMX Theater, Booth J83, Hall B) 1:00 P.M. - 5:00 P.M. Conference Programming (Rooms 206 – 209, Level 2) 2:00 P.M. - 2:30 P.M. ACE Award Winners Ceremony (ACE Awards Pavilion, Booth V89, Hall B)

SCAN THE QR CODE to access the app and CAMX schedule online.

5:00 P.M. - 6:00 P.M. Welcome Reception (Valencia Ballroom Foyer, Level 4)

5

theCAMX.org

CAM X 2025

2025

CAMX EVENTS OVERVIEW

CAMX is not just a conference or trade show; it’s an experience that connects you with the brightest minds and most influential leaders in the composites and advanced materials industries. With so much happening, make sure you plan to see what is of most interest, and network with exhibitors and your peers. Below are a few items to help you make the most of your time while in Orlando.

SAMPE Awards Ceremony & Dinner MONDAY, SEPTEMBER 8 | 5:00 P.M. – 7:30 P.M. OCCC – Tangerine Ballroom

CAMX General Session With CAMX Award Winners TUESDAY, SEPTEMBER 9 | 8:30 A.M. - 10:00 A.M. OCCC – Valencia Ballroom (Level 4) Join us for an inspiring CAMX keynote address by Sheryl Connelly, former chief futurist for Ford Motor Co. Drawing from years of guiding innovation at the highest levels of the automotive industry, Connelly will demystify how to tap into global shifts and lean into uncertainty to drive break through innovation. This session promises to leave attendees not only inspired but equipped to lead their companies into the next era of manufacturing excellence. The CAMX Award winners will also be announced during the General Session.

Join SAMPE at the SAMPE Awards Ceremony and Dinner recognizing outstanding individuals for their distinguished contributions in the fields of materials and processes. Enjoy the opportunity to mix and mingle with the industry’s top thinkers and leaders. Registration is $25 per person. RSVP required. ACMA Membership Awards Ceremony & Reception MONDAY, SEPTEMBER 8 | 5:30 P.M. – 7:30 P.M. Hyatt Regency Orlando – Florida Ballroom (Convention Level) Join ACMA and composites industry leaders at the Membership Awards Ceremony and Reception to recognize exceptional individuals for their dedication and commitment to the success of the industry and its Association. During the ceremony, ACMA will announce the winners of the following awards: Lifetime Achievement, Hall of Fame, Volunteer of the Year and the Chairman’s Award as well as recognize industry pioneers with the Pioneer Award. Registration is free. SPONSORED BY:

SPONSORED BY:

Welcome Reception TUESDAY, SEPTEMBER 9 | 5:00 P.M. – 6:00 P.M. OCCC – Valencia Ballroom Foyer (Level 4)

Kick off the week with good vibes and great company at our opening celebration! Mix, mingle and make new connections — or catch up with longtime industry friends — in a relaxed, high energy setting. Enjoy refreshments and plenty of reasons to toast the start of an exciting week! SPONSORED BY:

CAMX First-Time Attendee Orientation TUESDAY, SEPTEMBER 9 | 7:45 A.M. - 8:30 A.M. OCCC - W314 (Level 3) | Pre-registration required Join us for the First-Time Attendee Breakfast, an empowering event that brings together new attendees from across the globe. Share experiences, build your network and support one another in advancing your careers. SPONSORED BY:

Exhibit Hall Hours Tuesday, September 9 th Wednesday, September 10 th Thursday, September 11 th

10:00 A.M. – 5:00 P.M. 9:00 A.M. – 5:00 P.M. 9:00 A.M. – 1:00 P.M.

6

SEPT 8-11, 2025 / ORLANDO, FL

CAM X 2025

CAMX EVENTS OVERVIEW

Poster Session Meet and Greet WEDNESDAY, SEPTEMBER 11 | 1:00 P.M. – 2:00 P.M. OCCC - Lobby B (Level 1, Near Registration)

Exhibitors, Product Displays & Demonstrations

The largest industry marketplace is at CAMX this week! From new companies in the composites and advanced materials space, to traditional companies o ering products for new market segments — leave ample time to see the Hall! You’ll also find exhibitor demonstrations, and the CAMX and ACE awards pavilions where you can touch and feel the 2025 award finalists’ submissions. Plus, plenty of food and drink. Conference Program CAMX o ers the most extensive collection of experts and topics anywhere around the globe. From technical research to case studies and panel discussions, the conference program includes over 100+ sessions. See page 22 for conference program sessions and use the mobile app to view the full conference program with session descriptions and speaker bios. Conference program summary MONDAY SEPTEMBER 8 | 9:00 A.M. – 4:00 P.M. Tutorials – included in premium registration or à la carte TUESDAY SEPTEMBER 9 | 1:00 P.M. – 5:00 P.M. Featured presentations, technical paper presentations and education sessions WEDNESDAY SEPTEMBER 10 | 9:00 A.M. – 5:00 P.M. Featured presentations, technical paper presentations and education sessions THURSDAY SEPTEMBER 11 | 9:30 A.M. – 12:30 P.M. Complimentary featured presentation and education session at the CAMX Theater The bulk of the conference program is composed of presentations based on peer-reviewed research papers, as well as presentations from companies and individuals willing to share their expertise. CAMX thanks the more than 200 volunteers from the industry who contributed to this program.

This exciting competition attracts the next generation of researchers, engineers and industry professionals from universities and organizations around the globe. Make sure to stop by to see all of the latest and greatest research happening in the industry. SPONSORED BY:

Young Professionals Meet-Up WEDNESDAY, SEPTEMBER 10 | 4:00 P.M. - 5:00 P.M. OCCC - The Hive – Booth A42, Exhibit Hall (Level 2)

Relax and connect during our Young Professionals Meet-Up in The Hive, a newly redesigned networking hub located on the exhibit hall floor. This event is designed to foster meaningful connections and future collaborations for the next generation of composites industry professionals, while you’re grabbing a refreshment. Good Day, CAMX THURSDAY, SEPTEMBER 11 | 9:00 A.M. - 10:00 A.M. OCCC - CAMX Theater, Exhibit Hall (Level 2) This year’s Good Day, CAMX panel will feature rising leaders who are driving innovation in materials sciences, manufacturing and sustainability. Hear from next-gen engineers and entrepreneurs breaking barriers and redefining leadership. Their insights will challenge companies to better engage, empower and learn from emerging talent. Be part of the conversation that will define the next era of composites. CAMX Mobile App Search for “CAMX 2025 in the Apple App Store or Google Play. This is an on-site guide in the palm of your hand, which gives you the latest scheduling updates and direct access to your MyCAMX account where you can select exhibitors to visit and events to attend. Search exhibitors, conference program and events, plus view maps and area information. You can also complete survey evaluation in the mobile app.

SCAN THE QR CODE to access the app and CAMX schedule online

7

theCAMX.org

CAM X 2025

2025

PROGRAM VOLUNTEERS

THE STRENGTH OF CAMX COMES FROM THE MANY INDUSTRY VOLUNTEERS INVOLVED. THANK YOU

CAMX Technical Committee Members Muthu Elen, Pacific Northwest National Laboratory Moutushi Dey, strategy consulting Sagar Vishnudas Kanhere, University of Tennessee, Knoxville David Leach, retired

CAMX 2025 Steering Committee Eric Howard, Montana Advanced Composites, CAMX Chair Lucy Houchin, Montana Advanced Composites Fletcher Lindberg, AOC

SAMPE Category Chairs Eric-Kerr Anderson, Winona State University Dounia Boushab, Pacific Northwest National Lab Partha Pratim Das, UT Arlington Benjamin Garcia, Weber State University Natalia Rivera-Gonzalez, Syensqo Joseph Heil, Spirit AeroSystems Inc. Vishwas Jadhav, Nova Thin Film Pharmaceuticals LLC Kais Jribi, Florida Polytechnic University Rujan Kayastha, Texas State University Vishal Kumar, Pacific Northwest National Lab Saman Menbari, Texas State University Amar Mohanty, University of Guelph Marcos Pantoja, The Boeing Company Sai Krishna Pinnamaneni, Spirit AeroSystems Inc. Minhazur Rahman, Arizona State University Eric Schmid, Aerostar International Sophie Sharafi, Pacific Northwest National Lab Rahul Sheley, Texas State University Dattaji Shinde, North Carolina Agricultural and Technical State University Michael Sims, Syensqo Sabarinathan Pushparaj Subramaniyan, 3M Robin Zwick, The Boeing Company

Marcy O ner, McCLARIN Composites Eric Smith, Toray Advanced Composites Bob Yancey, Hexcel Corp.

8

SEPT 8-11, 2025 / ORLANDO, FL

CAM X 2025

PROGRAM VOLUNTEERS

ACMA Reviewing Committee Roberta Amendola, Montana State University Arghyanil Bhattacharjee, Composites Research Network, The University of British Columbia Jacob Cartwright, McClarin Composites Scott Crump, Interplastic Corp. Chelsea Ducote, RapiCure Solutions Eltahry Elghandour, Cal Poly State University, San Luis Obispo Ray Liang, West Virginia University Rick Pauer, retired Stephen Pety, Spirit AeroSystems Inc. Ed Pilpel, Sustainable Composites LLC Michael Richardson, retired Jean-Pascal Schroeder, Scott Bader ATC Anurag Sharma, Nanyang Technological University Ramanan Sritharan, California Polytechnic State University SLO Keith Tellman, Hanwha Advanced Materials

Awards Program Committee Ashley Duncan , Chomarat North America Jonathan Taylor , Composites Weekly Scott Francis , CompositesWorld Dustin Davis , Norplex Micarta Dan Coughlin , Oak Ridge National Laboratory Jennifer Agnew Scott , Olin Epoxy Trevor McCrea , Syensqo

Poster Session Judges Davood Askari, Wichita State University Lou Dorworth, Abaris Training Resources

Rebekah Downes, FAMU-FSU College of Engineering Muthu Elen, Pacific Northwest National Laboratory

Tommy Hyatt, Lockheed Martin Matt Jacobs, Northrop Grumman Melissa Jaime, Aurorium Marcos Pantoja, The Boeing Company

Monjur Morshed Rabby, The University of Texas at Arlington Sachin Shendokar, North Carolina A&T State University Krishnan Veluswamy, University of Tennessee

THE FUTURE

9

theCAMX.org

CAM X 2025

2025

HOTEL MAP

CAMX 2025 HOTEL MAP 1 Orange County Convention Center - West Concourse

HOTELS 2 Hyatt Regency Orlando

3 Rosen Centre Hotel 4 Rosen Plaza Hotel 5 Double Tree by Hilton at SeaWorld

6 Spring Hill Suites by Marriott Orlando Convention Center/International Drive Area 7 Residence Inn by Marriott Orlando Convention Center/International Drive Area

10

SEPT 8-11, 2025 / ORLANDO, FL

CAM X 2025

2025

GENERAL INFORMATION

GETTING TO CAMX CAMX Location Orange County Convention Center, West Building 9800 International Drive Orlando, FL 32819 Transportation/Parking

Shuttle Buses: Complimentary shuttle service will run Tuesday through Thursday from the Rosen Plaza and DoubleTree by Hilton Orlando SeaWorld and the Orange County Convention Center (OCCC). Attendees staying at the Residence Inn or SpringHill Suites can use the I-Ride Trolley for transportation. The Hyatt Regency and Rosen Centre are connected to the OCCC via a covered skywalk, so shuttles are not needed.

Orlando Welcome Center

I-RIDE Trolleys: Taking an I-RIDE Trolley is one of the most convenient and least expensive ways to explore the International Drive resort area. Trolley stops are conveniently located in front of the West building on International Drive. Trolley passes are available for purchase at the OCCC Guest Services desk. For maps and fare information, visit the I-RIDE Trolley website www.idrivedistrict.com. Parking: The OCCC operates on-site vehicle parking at the West Building. The West Building parking lot can be accessed a number of ways — via Exhibit Drive (north entrance), via Convention Way (south entrance) and via West Entrance Drive off Westwood Boulevard. Additional parking is also offered at the Destination Parkway Garage. Parking rates vary upon vehicle size and entry time. Parking spaces are available on a first-come, first-served basis. For those who plan on driving to the convention center, event-specific parking areas will be listed on roadway signage on International Drive, Universal Boulevard and the surrounding area.

Shuttle Bus Hours of Service TUESDAY, 9/9

6:30 A.M. – 10:30 A.M. | Every 15-20 minutes 10:30 A.M. – 3:00 P.M. | Every 30 minutes 3:00 P.M. – 7:00 P.M.* | Every 15-20 minutes WEDNESDAY, 9/10 7:30 A.M. – 11:30 A.M. | Every 15-20 minutes 11:30 A.M. – 2:00 P.M. | Every 30 minutes 2:00 P.M. – 6:00 P.M.* | Every 15-20 minutes THURSDAY, 9/11 7:30 A.M. – 1:30 P.M.* | Every 15-20 minutes

* Last coaches depart OCCC to return to hotels. Last pick-up from hotel is 30 minutes prior to end time. Schedule may vary due to traffic and weather conditions. Rideshare apps: Lyft and Uber are well established in Orlando and have established drop-off and pick-up points for riders based on where you are located on the campus. Each location is highly visible and indicated with banners and signage. LYNX bus: The area’s public bus system, LYNX, has routes servicing the OCCC with connections to the Orlando International

Orlando INFORMATION There is lots to do and see in Orlando! Discover all there is at www.visitorlando.com to see where to eat, visit and shop after the show ends each day. Check out Attendee Perks CAMX attendees can enjoy exclusive deals and discounts throughout the city of Orlando. From things to do to delicious dining, CAMX attendees can enjoy all the character of the area while indulging in overall savings. Visit www.visitorlando.com/ offers/ to see what deals await.

Airport and downtown Orlando. To plan your journey and obtain the latest fares, visit the LYNX website at www.golynx.com.

12

SEPT 8-11, 2025 / ORLANDO, FL

CAM X 2025

GENERAL INFORMATION

WHEN YOU ARRIVE Registration

ACCESSIBILITY AND INCLUSIVITY Dietary Requirements: If you have specific dietary requirements and did not indicate this on your registration form, please inform the registration desk. Check with your server for information on specific ingredients and be sure to inform them of any requirements. Also note that the concession stands in the food court area o er products to meet a variety of dietary needs. Mother’s Lounge: Level 2, West Hall C Lobby, to the right of the Citrus Café (Food Court C) Inclusive Restroom: OCCC has one Companion Restroom in the building located in E/F Lobby. Cashless Building: The OCCC is cashless and accepts Visa, Master Card, American Express, Discover, Apple Pay and Google Pay. For the convenience of visitors, there are ATMs located in each lobby of the North, South and West concourses.

Registration for attendees and exhibitors is located in the Orange County Convention Center (OCCC) in Lobby C (Level 2). Attendees and exhibitors may pick up their badges and registration materials as well as purchase additional tickets to networking events and programming sessions, change their registration or purchase the conference proceedings. Lost badges will be reprinted once at no charge and a photo ID is required for all badge reprinting. A $30 charge will be applied to badges reprinted more than once.

Registration Hours SUNDAY, SEPTEMBER 7 | 1:00 P.M. - 4:00 P.M. MONDAY, SEPTEMBER 8 | 8:00 A.M. – 4:00 P.M. TUESDAY, SEPTEMBER 9 | 7:00 A.M. – 5:00 P.M. WEDNESDAY, SEPTEMBER 10 | 7:00 A.M. – 5:00 P.M. THURSDAY, SEPTEMBER 11 | 8:00 A.M. – 1:00 P.M.

Mobility Services: The OCCC has wheelchair ramps, automatic doors, passenger elevators and accessible restrooms for those who need them. Scooter and wheelchair rental services are provided by Scootaround. Through the on-site rental location, guests can rent mobility scooters and wheelchairs for events held at the convention center. Please note: Advance reservations are encouraged for a scooter or wheelchair rental by visiting the Scootaround website. Please call 1-888-441-7575 for more

information. Pick-up and drop-o locations for scooters and wheelchairs are located at the FedEx O ce Business Centers in the respective concourses.

13

theCAMX.org

CAM X 2025

2025

GENERAL INFORMATION

WHILE YOU’RE AT CAMX Attire: We want you to be comfortable while you’re at CAMX. The o cial dress is business casual. Make sure to wear layers or bring a jacket as session rooms can be cool. Download the CAMX App: The CAMX app is an on-site guide in the palm of your hand. Search the Apple Store or Google Play for “CAMX 2025” to download the app onto your mobile device so you can stay up to date on the latest developments and happenings. Features include: • Facility and exhibit hall maps • Access to MyCAMX • Select conference program sessions

Water Bottle Fill Stations: Refill your reusable bottle with filtered water at one of the many drinking fountains/fill stations throughout the building. Wireless Access: Complimentary internet is o ered free of charge and is available in all public spaces. Bag/Coat Check: A Bag/Coat Check is located near Registration in Lobby C. Coat check is available on Thursday from 8:00 a.m. – 2:00 p.m. A small fee of $4 is required to utilize this service. Visit the main registration area for full details. Lost & Found: Misplaced items may be turned in at CAMX registration. These will be kept at the CAMX registration area until the conclusion of the event, at which time they will be turned over to the OCCC. Business Center: FedEx O ce is the full-service business center, located in the West Concourse, near Hall C and Registration. FedEx O ce o ers many services to meet your convention and exhibiting needs with ultra-quick turnaround. Safety, Security and Emergency Information: For major medical emergencies, please call 911 and mention your location. For minor medical emergencies, small cuts or other issues please see the First Aid O ce near Registration. To report any security or safety issues, please visit the CAMX security o ce near Registration, or for immediate attention call OCCC Security Command Center: 407-685-1119 Smoking: The convention center is a non-smoking facility. By state law, and in the interest of public health, the convention center has adopted a non-smoking policy. There are designated areas outside the building where smoking and vaping are permitted.

• Select exhibitors to visit • CAMX general information • Safety and security info • Hotel info

SCAN THE QR CODE to access the app and CAMX schedule online

Stay connected to CAMX on Social Media Use #CAMX2025 to tweet about your CAMX experience Like “CAMX” YouTube: theCAMX LinkedIn: CAMX - The Composites and Advanced Materials Expo Housing/Hotel Reservation Assistance: If you have questions or need assistance with your housing reservations, please contact your hotel directly. You may also contact the CAMX Housing Bureau, Conference Direct: • Email: thecamx@conferencedirect.com • U.S. Toll-free: 1-888-557-0824 (Domestic) • International: +1-801-512-2547 (International) • Phones are answered Mon. – Fri. from 9:00 a.m. – 7:00 p.m. ET Food Concessions: Food concessions are located near the CAMX Awards Pavilion in the back right corner and near the exhibitor lounge in the back left sides of the hall. Additional concessions are also available in the Lobby C food court. If you have specific dietary restrictions, please be sure to inform the servers.

14

SEPT 8-11, 2025 / ORLANDO, FL

CAM X 2025

GENERAL INFORMATION

SHOW POLICIES Registration Badges

Registration badges must be worn at all times during the event. Badges cannot be shared with or loaned to other people. Anyone found to be doing so will be asked to pay the Full Conference registration fee. Photography and Videography Registration, attendance and participation in CAMX, ACMA and SAMPE meetings and events constitutes an agreement by the registrant for ACMA’s and SAMPE’s use and distribution (both now and in the future) of the registrant/attendee’s image and/ or voice in photographs, videos, electronic reproductions and audio of such events and activities. Photography/videography is not allowed in the Exhibit Hall or any Conference Program session unless previously arranged for and approved by CAMX show management. Antitrust Guidelines All participants agree to adhere to the following Antitrust Guidelines in order to prevent unintentional violations of the antitrust laws. The following topics of discussion must be avoided at CAMX: • Current or future prices, rates or bids (great care must be taken in discussing past prices, rates or bids) • What constitutes a “fair” profit level

Phones As a courtesy, please mute your cellphones while in program sessions. Weapons CAMX attendees are not permitted to carry weapons of any kind, including concealed or displayed firearms, onto the premises of any CAMX events. We reserve the right to require conference participants who violate this policy to immediately leave the event. Each attendee agrees to comply with this policy, regardless of whether signs prohibiting weapons are posted at the premises of any o cial CAMX event. Harassment CAMX is dedicated to providing a harassment-free conference experience for everyone. We do not tolerate harassment of conference participants in any form. CAMX attendees, exhibitors and vendors violating these rules may be sanctioned or expelled from the conference without a refund at the discretion of the show organizers.

• Possible increases or decreases in prices or rates • Standardization or stabilizations of prices or rates • Pricing procedures • Credit terms • Control of sales • Allocations of customers or markets

Age Restrictions CAMX is a professional trade show and is not appropriate for children. Anyone under the age of 18 is not permitted on the Exhibit Hall floor, unless special arrangements have been made in advance with CAMX show management. This is for the safety of all event participants.

EVALUATIONS We want to know how your experience was at CAMX! Evaluations are a critical tool in planning for upcoming meetings and events. Your input is invaluable as we strive to improve and expand our program o erings. Immediately after the show, attendees will receive a survey via email. Please take time to complete the survey. You can also complete individual event and session evaluations through the mobile app.

15

theCAMX.org

CAM X 2025

2025

2025 ACMA EVENTS

ACMA EVENTS TIME

EVENT

LOCATION

ROOM

MONDAY, SEPTEMBER 8, 2025

ACMA Awards Ceremony & Reception

Hyatt Regency Orlando

Florida Ballroom

5:30 P.M. - 7:30 P.M.

TUESDAY, SEPTEMBER 9, 2025

ACMA Construction/Infrastructure Forum OCCC, West

Room 307A

10:30 A.M. - 12:00 P.M.

ACE Award Winners Ceremony

OCCC, West

ACE Pavillion T88

2:00 P.M. – 2:30 P.M.

Automotive Composites Alliance

OCCC, West

Room 307A

2:30 P.M. - 3:30 P.M.

WEDNESDAY, SEPTEMBER 10, 2025

ACMA Resin Managers Council

OCCC, West

Room 307A

7:30 A.M. - 8:30 P.M.

Emerging Leaders Program Breakfast

OCCC, West

Room 307D

8:00 A.M. - 9:00 A.M.

ACMA Pultrusion Industry Council

OCCC, West

Room 307A

1:00 P.M. – 2:00 P.M.

ACMA Education Committee Meeting

OCCC, West

Room 307D

2:00 P.M. – 3:00 P.M.

ACMA High Performance Council Meeting

OCCC, West

Room 307A

2:30 P.M. – 3:30 P.M.

ACMA Emerging Leader Info Session

OCCC, West

ACMA Booth R83

3:30 P.M. – 4:00 P.M.

ACMA Booth Reception

OCCC, West

ACMA Booth R83

4:00 P.M. – 5:00 P.M.

Please refer to CAMX event app for any updates or changes.

16

SEPT 8-11, 2025 / ORLANDO, FL

CAM X 2025

2025 SAMPE MEETINGS & EVENTS

SAMPE MEETINGS & EVENTS TIME EVENT

LOCATION

ROOM

MONDAY, SEPTEMBER 8, 2025 5:00 P.M. - 6:00 P.M.

SAMPE Awards Reception

Orange County Convention Center Orange County Convention Center

Tangerine Foyer

SAMPE Awards Dinner (RSVP Required)

Tangerine Ballroom

6:00 P.M. - 8:30 P.M.

TUESDAY, SEPTEMBER 9, 2025

10:30 A.M. - 11:30 A.M. SAMPE Young Professional Networking Session

Orange County Convention Center West Orange County Convention Center West

Room 308A

SAMPE Community Engagement Networking Session

Room 308A

3:00 P.M. – 4:00 P.M.

SAMPE Honorees Toast

SAMPE Booth

Booth F83

4:00 P.M. - 4:30 P.M.

WEDNESDAY, SEPTEMBER 10, 2025

SAMPE Co ee Happy Hour: Meet SAMPE Experts, Past Presidents, Fellows

SAMPE Booth

Booth F83

3:00 P.M. - 4:00 P.M.

Please refer to CAMX event app for any updates or changes.

17

theCAMX.org

CAM X 2025

2025

For details on the below papers and presentations, please visit the CAMX app.

PROGRAM

** All posters will be on display the whole duration of CAMX, located at the Lobby B Concourse. Meet the Authors will take place on Wednesday, Sept. 10th from 1:00 P.M. - 2:00 P.M.

TIME

TITLE

SESSION TYPE

LOCATION

FEATURED PROGRAMMING TUESDAY, SEPTEMBER 9, 2025 11:00 A.M. – 12:00 P.M. Improving NASCAR Driver Safety Through Composites and Unique Additive Tooling

Featured Speaker

W206 A

Challenges and Opportunities in Supersonic Materials Development Overcoming Challenges in Large-Scale FRP Facades: The Lucas Museum of Narrative Art Advancing Space Materials and Composites for Extreme Environments Composites 101: Introduction to Composites: Materials, Manufacturing and Applications

Featured Panel

W206 A

1:00 P.M. - 2:15 P.M.

Featured Speaker

W206 A

2:30 P.M. – 3:15 P.M.

Featured Panel

W206 A

3:30 P.M. – 4:30 P.M.

CONFERENCE PROGRAM BY TRACK

Featured Speaker W209 A

3:30 P.M. - 5:00 P.M.

WEDNESDAY, SEPTEMBER 10, 2025 9:00 A.M. - 10:30 A.M. Advancing Infrastructure: Real-World Successes & Opportunities With FRP in Florida

Featured Panel

W206 A

Leveraging Recycled and Bio-Based Content for Both Sustainable and Cost-Effective Solutions SM2ART Innovation in Action: Scalable Composite Solutions From Nuclear Formwork to Smart Foams and AI

Featured Panel

W206 A

1:30 P.M. - 2:30 P.M.

Featured Panel

W206 A

3:00 P.M. - 4:30 P.M.

THURSDAY, SEPTEMBER 11, 2025 10:00 A.M. – 11:00 A.M. Novel Measurements and Research Pathways to Better Understand Composite Failure

Featured Speaker

CAMX Theater

ADDITIVE MANUFACTURING TUESDAY, SEPTEMBER 9, 2025 1:00 P.M. - 1:30 P.M.

Multiplexing Core & Sheath Extrusion System Development for Additive Manufacturing for Inner-Bead Multi-Material Capability Additive Manufacturing of High-Temperature Ceramic Heat Exchanger Heated Compression Testing to Reduce Calibration Costs in the Onboarding of Fiber-Reinforced Feedstocks for Large Area Additive Manufacturing via Thermoplastic Extrusion Digital Light Processing of Polymer-Derived Ceramic Precursors for the Fabrication of Silicon Oxycarbide Composites Quasi-Static and Dynamic Crush of Electroplated Lattice Structures

Technical Paper

W208 C

Technical Paper

W208 C

1:30 P.M. - 2:00 P.M.

Technical Paper

W208 C

2:00 P.M. - 2:30 P.M.

Technical Paper

W208 C

2:30 P.M. - 3:00 P.M.

Technical Paper

W208 C

3:00 P.M. - 3:30 P.M.

Rapid Low-Cost Additive Tooling

Education Session W208 C

3:30 P.M. - 4:30 P.M.

18

SEPT 8-11, 2025 / ORLANDO, FL

CAM X 2025

PROGRAM

TIME

TITLE

SESSION TYPE

LOCATION

WEDNESDAY, SEPTEMBER 10, 2025 10:30 A.M. - 11:00 A.M. 3D Printed Continuous Basalt-Fiber/PA12 Composites Under Space Environment: A Morphological and Chemical Assessment

Technical Paper

W208 C

E ect of Localized Microstructural Features on the Mechanical Behavior of Additively Manufactured Inconel 718 Parts Performance Deviations in 3D Printed Continuous Carbon Fiber-Reinforced Structures by Anisotropic Topology Optimization Boron-Nitride Nanoparticle Inoculation for Microstructural Control and Thermal Stress Reduction in Hybrid Wire-Powder Laser Metal Deposition Experimental Permeability Calculation Approaches of Additively Manufactured Porous Media With Controlled Porosity

Technical Paper

W208 C

11:00 A.M. - 11:30 A.M.

Technical Paper

W208 C

11:30 A.M. - 12:00 P.M.

**Poster Session Lobby B Concourse (Level 2)

1:00 P.M. - 2:00 P.M. Meet & Greet

CONFERENCE PROGRAM BY TRACK

**Poster Session Lobby B Concourse (Level 2)

1:00 P.M. - 2:00 P.M. Meet & Greet

Hybrid Composite in Joining Metals - Composites

**Poster Session Lobby B Concourse (Level 2) **Poster Session Lobby B Concourse (Level 2)

1:00 P.M. - 2:00 P.M. Meet & Greet 1:00 P.M. - 2:00 P.M. Meet & Greet

Micro-Curing Behavior and Structural Characterization of UV-Curable Polyimides for Direct Ink Writing Additive Manufacturing

ADVANCES IN MATERIALS TUESDAY, SEPTEMBER 9, 2025 1:00 P.M. - 1:30 P.M.

Enhancement of the Open Hole Tension Properties of the Nanocomposites Using Carbon Nano-Coils Impact Properties Improvement of Nanocomposites Using Various Carbon Nanotube Geometries Protecting Carbon Fiber-Reinforced Polymer Composites From Heat Damage With an Integrated Polyimide Aerogel Flame and Thermal Barrier Enhanced Performance Utility of Converted Carbon Fibers Thermal Stability of Polymer Matrix Composites High-Performance High-Tg Epoxy System for Filament Winding Applications AI-Driven Optimization of Hybrid Boron-Carbon Fiber Composites for Aerospace Application: A Breakthrough in Compression-Dominated Structures

Technical Paper

W207 A

Technical Paper

W207 A

1:30 P.M. - 2:00 P.M.

Technical Paper

W207 A

2:00 P.M. - 2:30 P.M.

Education Session W207 A

2:30 P.M. - 3:30 P.M.

Technical Paper Technical Paper

W207 A W207 A

3:30 P.M. - 4:00 P.M.

4:00 P.M. - 4:30 P.M.

Technical Paper

W207 A

4:30 P.M.- 5:00 P.M.

19

theCAMX.org

CAM X 2025

2025

For details on the below papers and presentations, please visit the CAMX app.

PROGRAM

** All posters will be on display the whole duration of CAMX, located at the Lobby B Concourse. Meet the Authors will take place on Wednesday, Sept. 10th from 1:00 P.M. - 2:00 P.M.

TIME

TITLE

SESSION TYPE

LOCATION

WEDNESDAY, SEPTEMBER 10, 2025 9:00 A.M. - 9:30 A.M.

Synthesis and Processing of SiBCN/BNNT Composites With High Thermal Shock Resistance

Technical Paper

W207 A

9:30 A.M. - 10:00 A.M. Rapid-Cure Honeycomb Sandwich Composite Repair 10:00 A.M. - 10:30 A.M. Innovating Automotive Composites: Proxxima™ R3630 C32 DCPD Resin for Class-A Surface Parts 10:30 A.M. - 11:00 A.M. Thermoplastic Composite High-Rate Fuselage Manufacturing Demonstrator

Technical Paper Technical Paper

W207 A W207 A

Technical Paper

W207 A

Mechanical Properties of Cryogenically Cycled Thermoplastic Composites Under Long-Term Moisture Exposure Crosslinking and Pyrolysis of Poly (Aryl Ether Ketones) for Polymer-Derived Carbon Design of Experiment Effect of TPO Concentration & UV Treatment on the Degree of Cure of Polyimide Determining Phase Transitions in Polymer-Derived Carbon via Dynamic X-Ray Diffraction Dicyclopentadiene-Based New Unsaturated Polyester Resins With Lactone Structure Low-Density, Quick-Cure Honeycomb Filler for Sandwich Composites Multiaxial Tension Testing of Materials for Lighter-Than-Air Flight Applications Oxidation Resistance and Graphitizability of Benzoxazine Derived Carbon Catalyzed by Ferrocene Performance of Quasi-Isotropic GF/PET Laminates in Impact and Compression After Impact

Technical Paper

W207 A

11:00 A.M. - 11:30 A.M.

CONFERENCE PROGRAM BY TRACK

**Poster Session Lobby B Concourse (Level 2) **Poster Session Lobby B Concourse (Level 2) **Poster Session Lobby B Concourse (Level 2) **Poster Session Lobby B Concourse (Level 2) **Poster Session Lobby B Concourse (Level 2) **Poster Session Lobby B Concourse (Level 2) **Poster Session Lobby B Concourse (Level 2) **Poster Session Lobby B Concourse (Level 2)

1:00 P.M. - 2:00 P.M. Meet & Greet 1:00 P.M. - 2:00 P.M. Meet & Greet 1:00 P.M. - 2:00 P.M. Meet & Greet 1:00 P.M. -2:00 P.M. Meet & Greet 1:00 P.M. - 2:00 P.M. Meet & Greet 1:00 P.M. - 2:00 P.M. Meet & Greet 1:00 P.M. - 2:00 P.M. Meet & Greet 1:00 P.M. - 2:00 P.M. Meet & Greet 1:00 P.M. - 2:00 P.M. Meet & Greet 1:00 P.M. - 2:00 P.M. Meet & Greet

Submerged Cure, Diver-Applied Composite Patch Technology **Poster Session Lobby B Concourse (Level 2)

Understanding Degradation Pathways for Polybenzoxazines Through Aryl-Ether-Ketone Isomers Beyond Styrene: Navigating Regulations With Cutting-Edge Formulations and Real-World Case Studies

**Poster Session Lobby B Concourse (Level 2)

Education Session W207 A

1:30 P.M. - 2:30 P.M.

Development of Core Shell Rubber Tougheners

Technical Paper Technical Paper

W207 A W207 A

2:30 P.M.- 3:00 P.M.

Recyclable Type IV Hydrogen Pressure Vessel for Fuel Cell Electric Vehicles

3:00 P.M. - 3:30 P.M.

CAM X 2025 20

SEPT 8-11, 2025 / ORLANDO, FL

PROGRAM

TIME

TITLE

SESSION TYPE

LOCATION

Advancements in Thermoset Composites for Automotive Lighting Applications Low-Temperature Cure Bismaleimide Composite Tools With Excellent Tool Life

Technical Paper

W207 A

3:30 P.M. - 4:00 P.M.

Technical Paper

W207 A

4:00 P.M. - 4:30 P.M.

BONDING AND JOINING WEDNESDAY, SEPTEMBER 10, 2025 1:30 P.M. - 2:00 P.M.

A Fundamental Study on the Influence of Plasma Treatment Parameters on the Adhesive Bonding of Polyetherketoneketone Thermoplastic Substrates New Developments in Nonflammable Structural Bonding Ultrasonic Welding of Thermoplastic Composites for In-Space Manufacturing and 3D Printed Structure Reinforcement Applications Trends of Evaluation of Electrical and Interfacial Adhesion, Hydrophobicity of Various Nanoparticle-Embedded Polyurethane for Anti-Icing Aircraft Topcoat The Uncontrolled Variable: How to Identify and Prevent Non Obvious Sources of Contamination

Technical Paper

W208 C

CONFERENCE PROGRAM BY TRACK

Education Session W208 C

2:00 P.M. - 3:00 P.M.

Technical Paper

W208 C

3:00 P.M. - 3:30 P.M.

Technical Paper

W208 C

3:30 P.M.- 4:00 P.M.

Education Session W208 C

4:00 P.M. - 5:00 P.M.

BUSINESS, REGULATORY AND WORKFORCE DEVELOPMENT TUESDAY, SEPTEMBER 9, 2025 1:00 P.M. - 2:00 P.M. Global Chemical Legislation Update: Key Impacts on the Composites and Advanced Materials Industries Education Session W209 A 2:00 P.M. - 3:00 P.M. Housekeeping: Automated Intelligence - Augmenting Industrial Housekeeping With Dust Control Fans Education Session W209 A 3:00 P.M. - 3:30 P.M. Impact of Composite Materials Research on Underrepresented Communities Technical Paper W209 A

DESIGN, ANALYSIS AND SIMULATION TUESDAY, SEPTEMBER 9, 2025 1:00 P.M. - 1:30 P.M.

Cryogenic Exposure E ects on CFRP Composites: Multi-Scale Investigation via Tensile Testing and AFM Analysis Tension-Tension Fatigue and Flammability Behavior of Fire-Resistant Carbon Fiber Composites for Fire Drone Applications A Practical Accelerated Ultraviolet Exposure Test for Polymers Informed by Data and Easily Implemented

Technical Paper

W209 C

Technical Paper

W209 C

1:30 P.M. - 2:00 P.M.

Technical Paper

W209 C

2:00 P.M. - 2:30 P.M.

21

theCAMX.org

CAM X 2025