ARP Supply Vol. 3
Charging Hoses & Tube Benders
Order No.
Unit#3335095
TUBE BENDERS
Unit#2744093
Lgth.
Spring
11672 11696 11710 11712 11725 11750 11775 11799 11983 11984 11985 11986 11988
72” 96” 10’ 12’ 25’ 50’ 75’ 100 36” 48” 60” 72” 96”
CHARGING HOSES
1/4”
3 Pack
60360
Accessories
Chrome fittings. Specially formulated rubber tube resists most refrigerants. Blow-off groove channels refrigerant to prevent spray back. 1/4” straight x 1/4” 45° angle fitting. 2500 PSI minimum burst and 500 PSI maximum working pressure. Charging Hoses
Order No.
60352
Desc. 19010 1/4” Gasket (6); valve depressor (3) 19020 Replacement gasket (10) 19302 Adjust-A-Valve opener (10)
Fits over soft copper and aluminum tubing during bending to prevent tube collapse. Sil- ver plated finish. Meets federal specifications.
Order No.
For Tubing OD In. Individual Benders
Charging Hoses & Tube Benders
Order No.
Lgth.
60354 60355 60356 60357 60358 60359 60360 60361 60351 60352 60353
1/4
Yellow
Unit#3335095
PRESSURE CONTROL HOSES
5/16
11012 11024 11036 11048 11060 11072 11096 11110 11112 11125 11150 11175 11200 11212 11224 11236 11248 11260 11272 11296 11310 11312 11325 11350 11375 11399 11612 11624 11636 11648 11660
12” 24” 36” 48” 60” 72” 96” 10’ 12’ 25’ 50’ 75’ 100 12” 24” 36” 48” 60” 72” 96” 10’ 12’ 25’ 50’ 75’ 100 12” 24” 36” 48” 60”
High Temperature
3/8
7/16
1/2 5/8 3/4
7/8 Bender Sets
1/4, 5/16, 3/8, 7/16, 1/2 & 5/8
1/4, 3/8, 1/2 & 5/8 1/2, 5/8, 3/4 & 7/8
Tubing Benders, Charging Hoses & Dye Injec- tor Kits
Consists of thermoplastic polymer inner tube and cover to eliminate vibration failures. Poly- ester braid reinforcement with high tensile strength and high modulus withstands high pressures. 4000 PSI minimum burst; 800 PSI maximum working pressure. -49°F to 266°F operating temperature. 1/4” straight x 90°. Yel- low.
Blue
Order No. 78724 78736
Length In.
24 36
We carry products from the world’s largest and best manufacturers. Centralize your purchases with us!
Red
This information is provided “as is” without warranty of any kind by any person, including without limitation, the owner and the publisher.
408
Made with FlippingBook