ALCO Catalog F13

Siderail Bumper Pads for Hill-Rom & Stryker Beds

Permanent Siderail Protector Designed to fit Hill-Rom Advance and Advanta series hospital beds, this versatile side rail protector provides full length coverage to help reduce the risk of side rail entrapment, and minimize injury by filling the gaps in and between the side rails. Convenient for caregivers, the Permanent Side Rail Protector allows rails to b e raised or lowered and the bed to be articulated without removing the side rail protector. Controls are accessible via a clear vinyl window.

AL-62603 $519.00 AL-62610 $519.00

Advance Bed Series—Complete 4 pieces Advanta Bed Series—Complete 4 pieces Stryker Secure I & II Bed Series— Complete 4 pieces

AL-67498 $529.00

Gap Protectors This padded protector fills the gap between split side rails while allowing access to built-in patient controls. Constructed of sturdy 1/4" plywood and covered in thick vinyl, the gap protector attaches with quick-release buckles. Wipes clean with liquid disinfectant. Meets CA#117 flame retardancy standard. One pair per package

Dimensions: 34"L x 12"H AL-62613 $109.00 Pair

Stryker HBSW Side Rail Protectors 1” protective padding

Address HBSW entrapment zones 1 through 4 and comply with pass measurement criteria for these zones Bed side rails can be raised or lowered without the need to remove the Protectors from the bed Stryker Secure I and II beds with Rounded Side Rails AL-67611 $499.00 Set of 4 Stryker Epic Beds with Rounded Side Rails AL-67612 $499.00 Set of 4

Split Siderail Protectors deters bed exit to protect from siderail entrapment Split siderails protector features soft padding and helps deter patient attempts to exit bed between half side rails. May also be used as a seizure pad. Quickly secures to most half rails with hook and loop attachment straps. Vinyl cover wipes clean with liquid disinfectant. Meets CA#117 flame retardancy standard. One pair per package AL-62615 $69.00 Pair

F13 CATALOG www.alcosales.com

Side Rail Wedges Features Four Uses In One Product: May be used singly to cover or close the gap between half side rails. Zip two together to provide full 70” length protection of double half rails, three quarter or full side rails. Provides protection on all sides including head and footboards.When placed on top of the mattress the wedge helps position patients at a subtle side angle to help relieve pressure on the back and increase patient comfort Dimensions: 35”L x 17”H x 2”D Meets CA #117 flame retardancy standards

AL-58234 $119.95 Pair

51

Call Our Friendly, Knowledgeable Customer Service Department For All Your Equipment & Parts Needs!