2025-26 Total Wheel Alignment Sourcebook

Parts

75200 BLUE 75400 GREY 75600 YELLOW 75800 RED

EZ Shim ™ FULL CONTACT DUAL ANGLE A Full Contact Dual Angle shim, consisting of only four part numbers, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjust changes within .03° toe and .10° camber. TION: Check for caliper to rotor clearance n installing this part on vehicles equipped rear disc brakes. Some vehicles may re the use of longer bolts . commend use of 10408 bolts (page 70) nd 75970 spacers (below) as required ment CAUT when with r requir Rec an

Rear Adjustment range: Camber ±1.50°/Toe ±1.50° Required: 1 shim per wheel APPLICATIONS See application charts, pages 7-70 for vehicle models and years. 75200 (Blue) Audi, Chevrolet, Chrysler, Dodge, Eagle, Ford, Geo, Isuzu, Nissan, Pontiac, Plymouth, VW 75400 (Grey) Audi, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, Mercury, Nissan, Olds, Plymouth, Pontiac, Saturn 75600 (Yellow) Buick, Cadillac, Chevrolet, Chrysler, Dodge, Geo, Honda, Hyundai, Kia, Nissan, Olds, Pontiac, Scion, Toyota, VW 75800 (Red) Buick, Cadillac, Chevrolet, Geo, Honda, Hyundai, Kia, Nissan, Olds, Pontiac, VW 75920 MARKER This will mark the areas to be removed. Marks will not rub o ff , and are easy to see. 75970 SPACER SET(8) This set (4 di ff erent sizes - 2 of each) aligns caliper to rotor after installation of a camber shim. Specifically designed to be used with the EZ Shim™ when cor recting some FWD cars with hub mounted rear disc brakes. Rear Adjustment range: Camber ±1.50° Toe ±1.50° Required: 1 per wheel APPLICATIONS FWD ONLY 75210 (Blue) Nissan: 2012 - 19 Versa 2014 - 19 Note

ACCESSORIES 75910 DIALCHART Just dial in the desired change needed for both camber and toe. 75915 CUTTER

75910 EZ Shim™ dial Chart lists changes in decimal degrees only.

This cutter is a neces sary tool for cutting the EZ Shim™ Its thin cutting blades mini mize shim breakage.

75915

75920

75970

75210

ar camber and toe up to ±1.5°. Kit s extended length hub bolts for erything needed to do the job right. REAR SHIM AND BOLT KIT Adjust rea includes eve REARS

75915 - Cutter, above

75610

75610 (Yellow) Nissan:

REAR SHIM AND BOLT KIT

2009 - 14 Cube 2013 - 19 Sentra 2007 - 2011 Versa

Universal shim kit includes extended length hub bolts so that you will have everything you need to do the job right. Improve tire wear, gas mileage and handling by getting alignment into specification. NOTE: Vehicles with rear disc brakes may also need caliper spacer kit #75970 (above).

Pontiac: 2003 - 10 Vibe Toyota: 2003 - 08 Corolla 2003 - 13 Matrix

Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada

118