2022-2023 Total Wheel Alignment Sourcebook

Parts 67660

SUBARU/SCION ADJ. REAR CAMBER ARM AND TOE KIT This high strength adjustable lower rear camber arm provides ±2.0° of change for the popular BRZ, FR-S, WRX and Impreza. Get the ultimate

Rear Adjustment range: Camber ±2.0° Toe 1.5° Fixed Required: 1 per wheel APPLICATIONS Scion: 2013 - 16 FR-S Subaru: 2013 - 20 BRZ 2009 - 18 Forester

in performance and handling with this stamped arm featuring our new xAxis™ Sealed Flex Joint which performs like a pillow joint but lasts like an OE joint. This kit is asy to adjust with a cam located d side of the arm. SPC’s control y kit on the market to include an

2010 - 19 Legacy, Outback 2008 - 16 Impreza 2008 - 21 WRX (Inc. STi) 2012 - 17 XV CrossTrek

e at the outboar arm is the onl

Toyota: 2017 - 20 86

offset toe bushing to increase the range of your factory cam. If you need more toe consider SPC’s toe arm #67655 (above).

67647 - Bushing Sleeves, pg 164 72509 - Ball Joint Press, pg 165

67664 67665 67666

SUBARU ADJUSTABLE REAR CONTROL ARM KIT Fully adjust camber and toe on the rear suspension of your Subaru Outback, gacy or Baja with this two arm kit from SPC. This kit offers a full ±2.5° of amber and toe change so you can get back to factory alignment specifications. Whether you need to adjust for ride height changes, prepare for the track, or correct for suspension wear, this kit will provide maximum suspension adjustability. Le c

67666

Rear Adjustment range: 67664 Camber/Toe ±2.50° Required: 1 per axle 67665 Camber ±2.00°

67665

67665 - SUBARU ADJ CAMBER ARM Dial in ±2.0° of rear camber with this remove and replace arm that has bonded rubber bushings to match chassis design parameters and includes the ride height sensor bracket that is needed on some applications. Because of the constraining 5-link suspension design, you will need to slot the frame bracket on the upper control arm to allow the knuckle to pivot for camber change. SPC recommends punch #74940 to make the job quick and easy.

67666 - SUBARU REAR LOWER ADJ TOE ARM Easily adjust rear toe on Subaru Legacy, Baha and Outback models with this adjustable control arm from SPC. This arm provides ±1.0° change with easy on-car turnbuckle style adjustment. The kit also includes replacement control arm hardware coated in our 700 hr salt spray tested hex chromate-free finish for long life. Need rear camber adjustment? Consider purchasing SPC camber arm #67665 .

Required: 1 per wheel 67666 Toe ±1.00° Required: 1 per wheel APPLICATIONS Subaru: 2003 - 06 Baja

2000 - 09 Legacy 2000 - 09 Outback

74940 - Punch Tool, pg 166 85125 Rotary File pg 169

Patent No. US 8,746,714

67667 67668

SUBARU ADJUSTABLE REAR TOE KIT Need to replace corroded or damaged OE toe cam bolts on the rear of the 2000 to 2009 Subaru Legacy, Outback and many more? SPC gives you options. 67667 is a replacement cam kit. 67668 includes a replacement bushing. Get

Rear Adjustment range: 67667 Toe ±1.50° Required: 1 per wheel 67668 Toe ±1.50° Includes Repl. Rubber Bushing

67668 Inc. Repl. Bushing

Required: 1 per wheel APPLICATIONS Subaru: 2003 - 06 Baja

up to ±1.5° of toe change and then lock it in place with these economical options. One kit is required per side or two for the entire vehicle.

2000 - 09 Legacy 2000 - 09 Outback 2006 - 10 Tribeca

67668 Replacement Bushing Location

98 Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada

Made with FlippingBook Digital Publishing Software