2022-2023 Total Wheel Alignment Sourcebook
Parts 67475
HONDA/ACURA CAMBER ARM
Rear Adjustment range: Camber ±3.0° Required: 1 per wheel APPLICATIONS Acura: 2006 - 11 CSX 2013 - 22 ILX Honda: 2006 - 15 Civic
Get your 8th and 9th generation Civic or Acura CSX & ILX track ready with SPC’s aluminum adjustable rear
camber arm. SPC aluminum arm weighs less than the OE arm it will replace. The arm is built with SPC’s xAxis™ sealed flex joint to reduce compliance. I unique adjustment design permi on car adjustment of ±3˚ camber Whether you need negative cam and reduced compliance for the want to get back to OE specificat lowering, this is the arm for you.
(Incl. Si and Hybrid)
ts ts . ber track or ions after
67476
CIVIC REAR CAMBER ARM Get your 10th generation Civic ready for the track with SPC’s aluminum adjustable rear camber arm. SPC’s aluminum arm weighs less than the OE arm it will replace. The arm is built with SPC’s xAxis™ sealed flex joint to reduce compliance. Its unique
Rear Adjustment range: Camber ±3.0° Required: 1 per wheel APPLICATIONS Honda: 2018 - 22 Accord 2016 - 22 Civic
(Incl. Si and Type R) 2017 - 22 CR-V / Hybrid 2019 - 22 Insight
adjustment design permits on-car adjustment of ±3.0° camber. Whether you need negative camber and reduced compliance for the track or want to get back to OE specifications after lowering, this is the arm for you. I bracket for installing on Type Rs.
ncludes
67477
HONDA REAR TOE CAM
Rear Adjustment range: Toe ±2.5° Required: 1 per wheel APPLICATIONS Honda: 2018 Accord
Extend your toe adjustment range on the rear of many popular Honda models. SPC’s extended toe cam kit will allow you to get a full ±2.5° of toe change. This cam bolt features a hex chromate free finish that offers a 700hr salt spray test for the best corrosion protection available. One kit is used for each side of the vehicle. The OE slot will need to be extended to take advantage of the full range of SPC’s cam. Use SPC rotary file #85130 or similar.
2016 - 21 Civic
(Incl. Si and Type R) 2017 - 22 CR-V / Hybrid 2019 - 22 Insight 85130 - Rotary File, pg 169
67485
SCION tC REAR ARM
Rear Adjustment range: (Includes the camber adjustment built-in from the factory) Camber +3.25° Required: 1 per wheel
This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC’s. The Scion tC comes from the factory with a cam bolt that provides ±1.25°. This factory change is not enough change for low applications. By increasing the leng the rear upper control arm SPC Perf adds 2° positive camber to the rear that can then be dialed in with the O
APPLICATIONS Scion: 2005 - 10 tC
ered
th of ormance
OE Replacement available #12025 See page 148.
suspension E cam bolt.
Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada
93
Made with FlippingBook Digital Publishing Software