2022-2023 Total Wheel Alignment Sourcebook

Parts 67300

Adjustment range: Camber +1.50° to +3.00° Required: 1 per wheel APPLICATIONS FRONT 67320 Acura: 2001 - 04 CL; 1997 - 99 CL (w/35.3mm Ball Joint Dia.) 1999 - 08 TL; 1996 - 98 TL 2.5; 2004 - 08 TSX Honda: 1998 - 02 Accord; 1988 - 91 Civic 1988 - 92 CRX; 1995 - 98 Odyssey Isuzu: 1996 - 99 Oasis 67330 Acura: 1997 - 00 EL; 1990 - 01 Integra; 1991 - 96 Legend 1996 - 04 RL; 2009 - 14 TL; 1996 - 98 TL 3.2 2009 - 14 TSX Honda: 2003 - 12 Accord; 2010 - 15 Accord Crosstour 1992 - 00 Civic; 1997 - 01 CRV; 1992 - 97 Del Sol 1997 - 02 Prelude (Non-SH) 67340 Acura: 1997 - 99 CL (w/33.5mm Ball Joint Dia.) Honda: 1990 - 97 Accord 67360 Acura: 1992 - 94 Vigor Honda: 1992 - 96 Prelude JOUNCE SPACERS (4) Dial in your up-travel stops on coil over suspensions. These easy to use Jounce Bumper Spacers allow you to control up-travel by simply placing urethane spacers between your factory bump stop and the shock body. The closed wedge design allows you to install the spacers without removing the spring or disassembling your strut. Take them out as easily as you put them in if you want to increase up travel. Each of the four spacers will decrease your up-travel by 8mm at the strut.

These Jounce Spacers are featured on our 72123 and 72130 Nissan arms

67320 67330 67340 67360

EXTENDED RANGE ADJUSTABLE BALL JOINT

Able to change camber from +1.50° up to +3.0° these ball joints are perfect for lowered vehicles. For changes less than .5° check out our Adustable ll Joints on page 91. These ball joints have the best clearance in the industry - thanks to our exclusive ‘low-profile’ design. And with OE strength built in, our ball joints are the ones that more pro installers use. +1 Ba

1997 - 02 Prelude SH 1992 - 94 Prelude 4WS APPLICATIONS REAR 67360 Honda:

40920 - Perf. Ball Joint Press, pg 161

1992 - 02 Prelude

67381 67382

HONDA ADJUSTABLE LOWER BALL JOINT

Front Camber Adjustment range: 67381 Civic: 0° to-1.0° Accord & CR-V: 0° to -.5° 67382 Civic: 0° to +1.0° Accord & CR-V: 0° to +.5° Required: 1 per wheel APPLICATIONS Honda: 2018 Accord 2016 - 21 Civic (not Type R) 2017 - 22 CR-V

Use spe

this adjustable ball joint to get back to cification on the Honda Civic, CR-V, and Accord. Whether you are tracking your vehicle or need some change to stop tire wear, this maintenance free sealed ball joint will do the job. SPC’s ball joint will ve up to -1° change on the Civic and up 5° on the taller struted CR-V and Accord. positive change? SPC’s ball joint #67382

gi to -0.

Need

will give up to +1° change on the Civic and up to +.5° change on the CR-V. NOTE: DOES NOT FIT CIVIC TYPE R.

OE Replacement ball joint available - #12715, page 149.

67410

HYUNDAI/KIA REAR EZ ARM XR ™ This adjustable rear upper control arm and toe cam kit, for many Hyundai and Kia models, will provide up to ±2° camber and ±2° toe change.

Rear Adjustment range: Camber ±2.0°/Toe ±2.0° Required: 1 per wheel APPLICATIONS Hyundai: 2007 - 10 Elantra

2011 - 12 Elantra Touring

Kia:

2007 - 10 Optima 2007 - 12 Rondo

85130 - Rotary File, pg 169

Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada

90