2022-2023 Total Wheel Alignment Sourcebook

Parts 67285

ESCAPE/TRIBUTE REAR CAMBER ARM Correct camber on previously non-adjustable suspensions with this adjustable control arm The remove and replace design makes the a ideal for quick and easy alignment adjustme as well as simple chassis part replacement. The adjustable arm has an easy to access turnbuckle design that adjusts camber ±2.0°, factory toe adjustments can then be used to complete the alignment.

Rear Adjustment range: Camber. ±2.00° Required: 1 per wheel APPLICATIONS Ford FWD/AWD: 2001 - 12 Escape Mazda FWD/AWD: 2001 - 11 Tribute Mercury FWD/AWD: 2005 - 11 Mariner

. rm nt

67289 Upper Camber 67290 Lower Camber 67291 Lower Setback 67292 Upper Setback 67293 Toe 67295

HONDA/ACURA 5 ARM SET

Rear Adjustment Range: 67289 (5 ARM SET) Camber: ±3.0° Toe: ±3.0° Setback: ±1.0” 67290 Camber: -2.0° to +4.0° 67291 Camber: ±3.0° 67292 Setback: ±1” 67293 Setback: ±1” 67295 Toe: ±3.0° Required: 1 per wheel APPLICATIONS 67289, 67290, 67291, 67292, 67293, 67295 Acura : 2004 - 08 TSX Honda: 2003 - 07 Accord 67290 ONLY Acura : 2001 - 06 MDX Honda: 1999 - 04 Odyssey 2003 - 08 Pilot See the web for in-depth information on this kit and how it will work in the Honda/Acura multi link suspension.

Use this five (5) link set to adjust camber, toe, set-back, and track width on your Accord, TSX, and many more Honda & Acura models. Whether you are modifying your suspension for the track or getting your alignment angles back after adjusting ride height, this is the most comprehensive kit for you. Honda’s multilink set-up is susceptible to binding if you try to change the length of just one of the arms. This kit

67295

67291

corrects that and will let you set your suspension where you want it without binding. Attention: The sequence of arm adjustments made is extremely important when upgrading this multi-link system.

67293

67292

67290

67295

67293

67291

67290

67292

67290 - UPPER CAMBER LINK WITH BALL JOINT Adjust camber up to ±1° with this adjustable camber link by itself. If more than 1° change is required, #67291 and #67292 may be required. Comes with two flanged castle nuts to fit both steel and aluminum knuckles.

67291 - LOWER CAMBER LATERAL LINK

67292 - LOWER FORWARD LATERAL LINK Use this arm to affect setback and toe. These links have bonded rubber bushings to maintain factory levels of noise vibration and harshness (NVH).

Use this arm to affect setback, camber and track width. This arm ties into the knuckle directly below the 67290. Adjusting this in unison with the upper link will take bind out of the system.

67295 - TOE LINK Use this arm to affect toe and track width. The kit also includes a replacement bolt and nut for the inboard end where we have found the OE cam bolt is often corroded and gets destroyed upon removal.

67293 - UPPER REARWARD LATERAL LINK Use this arm to affect setback and track width. The arm’s adjustability will allow you to remove bind as you adjust camber with the other arms.

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada

89