2022-2023 Total Wheel Alignment Sourcebook

Parts 23960

GM ADJ. BALL JOINT These heavy duty offset ball joints have a built n 3 degree offset which can be clocked to change camber, caster, or both. They are ideal for vehicles which cannot be aligned properly with the factory cam bolts due to installation of a lift or leveling kit. As an additional benefit, they also raise the outer end of the upper control arm, which increases clearance between the arm and the droop travel stops on the frame. This restores droop travel on trucks with leveling kits, and eliminates noise, vibration and harshness caused by arm to frame contact. i Note: Due to strength limitations of the factory upper control arm, this ball joint should not be used on trucks with tires larger than 33” unless a “tall knuckle” lift kit is installed. RAV4 CAMBER/TOE CAM BOLT Replace your OE rear camber or toe adjuster with this replacement cam bolt. OE cam bolts are frequently seized and can’t be adjusted. Remove the coroded bolt assembly and replace it with SPC’s cam bolt to restore the factory ±1.5° camber or toe change. This bolt features a plastic sleeve to eliminate future corrosion. LAND CRUISER FRONT CAM KIT The OE bolts on Toyota trucks and SUV’s are frequently “frozen” and do not allow for adjustment. Remove the frozen bolt assembly and replace it with an SPC cam kit to get up to ± 1.50° camber and caster change. OE adjuster assemblies that are severely corroded may require SPC’s press tool 40915 for removal, making the job quick and easy. 4RUNNER REAR UPPER ARM PAIR Improve the rear suspension on the 1996-2002 Toyota 4Runner to include this pair of able trailing links that will correct pinion angle issues typically found on lifted trucks. Each link includes an xAxis sealed flex joint for bind free djust a

Front Adjustment range: Camber ±3.00°/Caster ±3.00° Required: 1 per wheel APPLICATIONS Chevy/GMC RWD/4WD: (With 8 Lug Wheels)

2001 - 06 1500HD Crew Cab 1999 - 10 2500, 3500 Silverado, Sierra 2002 - 06 Avalanche 2500 2000 - 13 Suburban 2500 2000 - 14 Yukon 2500

Hummer 4WD:

2002 - 09 H2

72509 - Ball Joint Press, pg 165

25380

Rear Adjustment range: Camber ±1.50°/ Toe ±1.50° Required: 1 per wheel/

per angle changed

APPLICATIONS Toyota:

2001 - 05 RAV4

25385

Front Adjustment range: Camber ±1.00° Caster ±1.75° Required: 1 per wheel/

per angle changed

APPLICATIONS Toyota:

1998 - 07 Land Cruiser (100 Series)

40915 - Cam Extractor pg 161

25390

Rear Adjustment range: Rear Pinion Angle Required: 1 per axle/

per angle changed

APPLICATIONS Toyota:

1996 - 02 4Runner

articulation on one end and an OE style single bonded bushing on the other for high-performance trail duty and reduced Noise Vibration and Harshness (NVH). Sold as a pair, just one kit required for each truck. See SPC part

25460 to further dial in front suspension camber and caster adjustment.

See SPC part 25460 to further dial in front suspension camber and caster adjustment. See page 78.

76 Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada