2022-2023 Total Wheel Alignment Sourcebook

Parts Dodge/Jeep Pin Joints

These offset pin joints replace the upper pin joints on many models of Dodge and Ram Trucks. They come in 1/2° increments and provide for independent wheel caster and/or camber changes. To more easily remove and install these sleeves use the recommended installation sleeves along with a ball joint press.

23500 Series

Front Adjustment range: 23510 Cam/Cas ±.50° 23520 Cam/Cas ±1.00° 23530 Cam/Cas ±1.50° 23540 Cam/Cas ±2.00° Required: 1 per wheel APPLICATIONS Dodge 4WD: 1994 - 01 1500 Ram; 1994 - 99 2500 Ram Jeep 1984 - 01 Cherokee; 1986 - 92 Comanche RWD/4WD: 1993 - 04 Grand Cherokee 1984 - 90 Wagoneer; 1987 - 18 Wrangler Front Adjustment range: 23710 Cam/Cas ±.50° 23720 Cam/Cas ±1.00° 23730 Cam/Cas ±1.50° Required: 1 per wheel APPLICATIONS Dodge 4WD: 2000 - 02 2500 Ram, 3500 Ram Dodge RWD: 2000 - 02 3500 Ram w/monobeam Front Adjustment range: 23800* Cam/Cas 0.0° 23810 Cam/Cas ±.50° 23820 Cam/Cas ±1.0° 23830 Cam/Cas ±1.50° Required: 1 per wheel APPLICATIONS Dodge/Ram RWD: 2003 - 22 3500 Ram w/mono beam Dodge/Ram 4WD: 2006 - 08 1500 Ram Mega Cab 2003 - 22 2500, 3500 Ra m Front Adjustment range: 23850* Camber 0.0° 23852 Camber ±.50°

23580 - Ball joint press sleeves, pg 159 72509 - Ball joint press, pg 165

23700 Series

23780 - Ball joint press sleeves, pg 159 72509 - Ball joint press, pg 165

23800 Series

* 23800 is an OE Replacement Ball Joint - no camber/caster change

23780 - Ball joint press sleeves, pg 159 72509 - Ball joint press, pg 165

23850 Series

These heavy duty ‘King Pin” style joints replace the original plunging ball joint design on

23854 Camber ±1.0° Required: 1 per wheel APPLICATIONS

late model medium duty Dodge/Ram trucks and

Sterling Bullets. They provide independent adjustment up to 1° of camber. and will correct cross camber issues. his greasable pin joint uses bronze sleeve and hardened el pin to ensure long service e.

Dodge/Ram RWD/4WD: 2008 - 22 4500, 5500 Sterling Bullet RWD/4WD: 2008 - 10 45, 55 * 23850 is an OE Replacement Ball Joint - no camber/caster change

T

a ste lif

23940

DODGE/RAM 1500 ADJUSTABLE BALL JOINT or lowered, factory cams don’t give gh adjustment range on the Dodge/Ram series of trucks. Gain 2.25° of camber ster with these offset ball joints. Simply ce the ball joint in the stock upper control o get ±2.25° caster, camber, or a split and then dial in final adjustments with the factory cams. Bring ride quality and tire wear back into the green for your customer. Lifted enou 1500 or ca repla arm t

Front Adjustment range: Camber ±2.25°/Caster ±2.25° Required: 1 per wheel APPLICATIONS

Dodge/Ram RWD/4WD: 2006 - 18 1500 Ram

(Exc. Mega Cab)

72509 - Ball Joint Press, pg 165

Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada

74