2022-2023 Total Wheel Alignment Sourcebook

Tools 73140

CLASS 8 PITMAN ARM POPPER Working on heavy duty trucks often requires specialized heavy duty tools and this one-piece forged and heat treated tool delivers. Use this specially designed puller to remove Sheppard pitman arms for short sector and long sector shafts with a bolt or nut attachment. The heat treated pusher screw features fine threads and a ball bearing tip to make removal easier without damaging expensive steering box components.

73150

HD LOW-PROFILE PITMAN ARM POPPER ime and money on pitman arm removal jobs with this heavy duty low-profile n arm puller tool. Made with forged steel jaws, the low profile design removes need to remove the steering box. Specially designed for work on 3/4 and 1 ton ucks of most makes and models. US Patent No. 9,085,068

Save t pitma the tr

74400 74500 74600

ADJ SLEEVE WRENCHES These wrenches make presetting our . 74400

74400 1-1/2” Open End For 24160 - Holds outer bush ing body and for 24180 - Holds inner eccentric sleeve. 72370 -- Holds outer eccentric sleeve. 74500 1-1/4” Box End For 24120 , 24130 , 24180 - Adjusts the inner sleeve. 74600 Double Box End For 24220 , 24230 - Adjusts the inner sleeve.

adjustable truck sleeves (page 74) easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned over the slot opening of the sleeve body.

74500

74600

74910

KNOCK OUT PUNCH A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch for the older GM vehicles.

APPLICATIONS Cadillac RWD/4WD: 1999 - 01 Escalade Chevrolet/GM RWD/4WD: 1988 - 00 1500, 2500, 3500 1992 - 94 Blazer (Full Size) 1996 - 02 Express & Savana Van 1988 - 91 Jimmy (Full Size) 1992 - 99 Suburban; 1995 - 99 Tahoe 1992 - 99 Yukon Chevrolet/GM AWD: 1990 - 01 Astro & Safari Van

74914 - Replacement Offset Punch. 74915 - Replacement Center Punch.

74920 74930 74940

PUNCH TOOLS Use an SPC slot punch to elongate a hole and get the change you need. Whether the OE left you an upset that won’t break out, didn’t give you a large enough slot, or didn’t give you a slot at all, use this high quality tool to quickly and easily punch one. Made on the USA with tight tolerances and high quality bearings these punches are built to last.

74920 14mm bolt / ±8mm offset 74930 12mm bolt / ±7mm offset 74940 12mm bolt / ±4mm offset

16mm Range

14mm Range

8mm Range

74920

74930

74940

12mm Bolt

14mm Bolt

12mm Bolt

Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada

166