2022-2023 Total Wheel Alignment Sourcebook

Tools 45938

GM CAM BOL SOCKET

APPLICATIONS Buick:

2010 - 19 LaCrosse 2011 - 20 Regal 2013 - 19 XTS 2004 - 12 Colorado 2004 - 12 Canyon

Cadillac:

Many GM trucks and cars can be difficult to align because it is impossible to access the head of the cam bolt to adjust. This 3/8” drive socket fits over the end of the bolt allowing the technician to turn the alignment cams to change alignment angles after loosening the lock nut.

Chevrolet 4WD: GMC 4WD: Isuzu 4WD:

2006 - 06 i-350 2007 - 08 i-370 CAUTION: Not for use with impact wrenches (air tools). APPLICATIONS Cadillac RWD/4WD: 2002 - 20 Escalade Chevrolet/GMC RWD/4WD: 1999 - 18 1500 & HD Crew Cab 1999 - 10 2500, 3500 2002 - 13 Avalanche 1500, 2500 2004 - 12 Canyon & Colorado 2003 - 22 Express/Savana Van 2000 - 20 Suburban, Tahoe, Yukon, Yukon XL (1500, 2500) Hummer AWD: 2002 - 09 H2 2006 - 10 H3, H3T

45940

GM TRUCK/VAN CAM ADJUSTING TOOL

This wrench makes it easy to ad upper control arm cams on Chev Express and GMC Savana vans. tool surrounds the entire perime of each cam to provide a solid no-slip means to move the hard-to-reach and often rusty OEM cams.

just the rolet The ter

45945

GM HEAVY DUTY TRUCK TOOL This wrench makes it easy to adjust the control arm cams on many modern GM and Chevy HD Trucks along with the new Colorado and Canyon. The tool surrounds the entire perimeter of each cam to pro vide a solid no slip means to reach the hard-to-reach and often rusty OE cams.

APPLICATIONS Chevrolet/GMC RWD/4WD: 2011 - 19 2500/3500 2015 - 22 Canyon• 2015 - 22 Colorado• •NOTE: Not for ZR2 models

64225

MAGNETIC ANGLE GAUGE This angle gauge is an easy, accurate way for measuring frame and drive shaft angles. An ideal tool to ensure the drive line angle is still within specification for raised and lowered vehicles.

Check out SPC’s other gauges FasTrax™ Camber/Caster Gauge (page 172) and Universal Radial Run-Out Gauge (page 175) Alignment equipment manufacturers are using frame angle input with their software for completing Caster specifications.

65100

HONDA BUSHING EXTRACTOR Easily and quickly remove and install rear trailing arm bushing in as little as 15 minutes per side vs. the factory “book” time of 1.8 hours per side. No need to remove the trailing arm from the vehicle or use a hydraulic press.

APPLICATIONS Acura: 1994 - 01 Integra Honda:

1988 - 00 Civic 1988 - 92 CRX 1992 - 97 Del Sol

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada

163