2022-2023 Total Wheel Alignment Sourcebook

Heavy Duty Truck Axle Shims 80199-81099 ZINC TRUCK AXLE SHIMS

These popular heavy-duty axle shims are for vehicles with 1-3/4” to 2” wide leaf springs. APPLICATIONS: Any solid axle 2WD or 4WD vehicle. Note: Shims should not be stacked.

Part No.

Degree Qty/

Part No.

Degree Qty/

Width Taper Box

Width Taper Box

80199 80299 80399 80499 80599

6 6 6 6 6

80699 80799 80999 81099 1-3/4” - 2” 3° 1-3/4” - 2” 3-1/2° 1-3/4” - 2” 5° 1-3/4” - 2” 6° 80899 1-3/4” - 2”” 4°

6 6 6 6 6

1-3/4” - 2” 1/2° 1-3/4” - 2” 1° 1-3/4” - 2” 1-1/2° 1-3/4” - 2” 2° 1-3/4” - 2” 2-1/2°

Note: Ordering one Part Number supplies six shims in a

Breakaway

box.

89199-89899

UNI-WEDGE SHIMS (HD ZINC ALLOY) Twice the coverage - half the inventory. Changes caster positive or negative from 1/2° to 4°. APPLICATIONS: Any solid axle 2WD or 4WD vehicle. Note: Shims should not be stacked.

Note Ordering Part Nu supplie

:

one mber s six in a sizes in h.

Part No.

Degree Qty/

Part No.

Degree Qty /

Width Taper Box

Width Taper Bo x

89199 3”- 3-1/2”- 4” 1/2° 89299 3”- 3-1/2”- 4” 1° 89399 3”- 3-1/2”- 4” 1-1/2° 89499 3”- 3-1/2”- 4” 2°

6 6 6 6

89599 3”- 3-1/2”- 4” 2-1/2° 89699 3”- 3-1/2”- 4” 3° 89799 3”- 3-1/2”- 4” 3-1/2° 89899 3”- 3-1/2”- 4” 4°

6 6 6 6

shims ox. All

b

are 6” lengt

Double Breakaway

35038

HENDRICKSON (HTB) TORQUE BOX ADJUSTMENT SET (10) Adjust the Hendrickson HTB torque box with this full set of 10 replacement shims. The shim set includes 4 of the 1/32” shims, 4 of the 1/16” shims, and also 2 of the 1/8” shims to give you a full range of adjustment. Need to adjust the torque arm as well? Try our 35035, 35036, or 35037 shims (above).

35038 Adjustment: Torque Box APPLICATIONS Hendrickson HTB: 2007 & Up International: 2007 & Up Spartan: 2007 & Up

36080 36085

HENDRICKSON WALKING BEAM SHIMS These are the OE style shims recommended by Hendrickson. The 36080 offers three

adjustments at 0, 3/16” and 3/8”. The 36085 gives you four different adjustments of 0, 1/8”, 1/4” and 3/8”. Each part number includes 2 to a package.

36085

36080

36087

HENDRICKSON HD SHIMS This shim kit will adjust the thrust angle on Hendrickson’s ‘walking beam’ rear tandem axle suspension. Improve tire wear and handling by adjusting thrust angle from 0” to 3/8” in precise 1/32” increments. REPLACES these OE kits Euclid Nos: E-9327, E-9328, E-9329 Hendrickson Nos: 50130-000, 50131-000, 50132-000

Adj. Range: 3/8” Required: 1 set per wheel Includes: 2 (two)–five piece kits

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada

143