2022-2023 Total Wheel Alignment Sourcebook
Parts 87525
NISSAN FRONT CAM/CAS KIT
Front Adj. range: Camber/Caster ±2.00° Required: 1 per wheel 87525 APPLICATIONS Nissan:
T-BIRD/LS FRONT CAM/CAS KIT (4) These kits install in the lower control arms and provides easy and precise adjustment for caster and camber without any further modifications. replacement cam kit to restore the factory adjustment for front camber and caster change. Sold per wheel. Order two kits to service both sides of the vehicle. Many times factory adjusters can become corroded and freeze in place. Use this
2016-2022 Nissan Titan XD 2012-2022 Nissan NV1500, NV2500, NV3500
87540 87545
Front Adj. range: Camber ±1.00°/Caster ±2.00° Required: 1 per axle 87540 APPLICATIONS Ford: 2002 - 06 Thunderbird 87545 APPLICATIONS Jaguar: 2000 - 02 S-Type Lincoln: 2000 - 06 LS Replacement rear lower contol arm joint kits are available for these vehicles - see page 151 Front Adjustment range: Cam/Cas ±1.00° Required: 1 per wheel MONOBEAM - DANA 60 APPS Chevrolet/GMC: 1988 - 93 K30, V30, V3500 Dodge: 1972 - 83 W200/250 1975 - 93 W300/350
K KEY SHING HEX 88940
DANA 60 AXLE CAM/CAS KITS These exclusive kits provid a camber and caster chang for Dana 60 Axles. Replace the OE bushing with the correct eccentric bushing, rotate to adjust caster/ camber and lock in place. These kits provide full adju ment for future alignments
LOC BU
e e
TEFLON WASHER
Ford:
1974 - 79 F250 1974 - 91 F350
International:
1960 - 71 Pickup (1300)
st- .
89199 - 89899
UNI-WEDGE SHIMS (HD ZINC ALLOY) Twice the coverage - half the
For more shims check out our complete Heavy Duty Truck Section on pages 140-147. For additional shim widths see page 115
inventory. Changes caster positive or negative from 1/2° to 4°. APPS: Any solid axle RWD or 4WD vehicle.
Degree
Degree
No.
Width Taper Qty No.
Width Taper Qty
89199 3”- 3-1/2”- 4” 1/2°
6 89599 3”- 3-1/2”- 4” 2-1/2° 6 89699 3”- 3-1/2”- 4” 3° 6 89799 3”- 3-1/2”- 4” 3-1/2° 6 89899 3”- 3-1/2”- 4” 4°
6 6 6 6
89299 3”- 3-1/2”- 4”
1°
89399 3”- 3-1/2”- 4” 1-1/2° 89499 3”- 3-1/2”- 4” 2°
Double Breakaway
89635 89685
FORD CAMBER KIT (PR) This kit provides front camber adjustment on many popu lar Ford vehicles.
Front Adjustment range: Camber 0° to +1.25° Required: 1 per axle 89635 APPLICATIONS Ford: 1996 - 07 Taurus Sedan 1996 - 05 Taurus Wagon Mercury: 1996 - 06 Sable Sedan; 1996 - 05 Sable Wagon 89685 APPLICATIONS Ford: 2004 - 07 Freestar; 1994 - 03 Windstar Mercury: 2004 - 07 Monterey
Camber adjustment of up to 1.25°. These plates are sold in pairs, one for each side of the vehicle.
Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada
133
Made with FlippingBook Digital Publishing Software