2022-2023 Total Wheel Alignment Sourcebook

Parts 87350

TAURUS/SABLE WAGON REAR CAMBER KIT (PR) This kit provides camber change up to ±2.50° on each rear wheel of Ford Taurus and Mercury Sable Station Wagons only. After replacing the inner lower control arm bolt and elongating the hole, install the # 87350 cam bolt and rotate the head to adjust camber. 85130 - Rotary File, pg 169 FORD, MERCURY, LINCOLN CAMBER ADJ. BOLT The #87365 Adjustable Camber Kit allows additional camber changes up to ±1.5˚ for a tota ±2.5°, on the popular Ford Crown Victoria, Merc Marquis, and the Lincoln Town Car. Sagging of suspension on these heavyweight vehicles is n mal and routinely causes negative l of ury the or

Rear Adjustment range: Camber ±2.50°

Required: 1 per axle APPLICATIONS Ford: 1986 - 05 Taurus Station Wagon Mercury: 1986 - 05 Sable Station Wagon

87365

Front Adjustment range: Camber ±2.5° (±1.5° more than stock change) Required: 1 per wheel APPLICATIONS Ford: 2003 -12 Crown Victoria Lincoln: 2003 -11 Town Car Mercury: 2003 -11 Grand Marquis 2003 - 04 Marauder

F150/F250 (L/D) CAM/ CAS KIT (4) Use this kit to change caster and/ or camber on these unadjustable vehicles. Simply replace the existing upper control arm camber problems. Elongating the cam slots is completed in seconds using the new # 85137 3/8” Rotary File for Aluminum.

85130 - Rotary File, pg 169 02099 - Boot Clamp, pg 176

87385

Front Adjustment range: Camber ±2.00°/Caster ±2.00°

Required: 1 per axle APPLICATIONS Ford RWD/4WD:

1997- 02 Expedition 1997 - 03 F150 2004 - 05 F150 Heritage 1997 - 99 250 (LD) Lincoln RWD/4WD: 2002 - 03 Blackwood 1998 - 02 Navigator

mounting bolts with these cam bolts for caster/ camber changes up to 2.0°.

87400

GM RWD/4WD CAM/ CAS KIT (4)

Front Adjustment range: Camber ±2.00°/Caster ±2.00°

Required: 1 per axle APPLICATIONS Cadillac/Chevrolet/GMC AWD:

These heavy duty cams replace the upper control arm mounting bolts. Remove the OE bolts and replace with cams, rotating to provide camber and/or caster adjustment. It may be necessary to remove OE slugs and elon gate the bolt holes with # 74910 punch. # 83790 includes 2 cams to cover one side of the vehicle (page 123).

1990 - 05 Astro/Safari Van 1988 - 00 1500, 2500, 3500 (1999-00 Classic Only) RWD/4WD: 1992 - 94 Blazer (full size) 1999 - 00 Escalade; 1988 - 91 Jimmy (full size) 1992 - 99 Suburban/Yukon: 1995 - 99 Tahoe RWD: 1996 - 02 Express/Savana Van 4WD:

74910 - Punch, pg 166

87420

GM REAR TOE KIT Change Toe or Camber ±1° on the rear of GM’ Theta Platform vehicles with this cam nut. (Note: Most vehicles come with a cam nut on the ‘camber link’ and a standard, non-offset, nut on the ‘toe link.’ Changing toe will affect camber and vice versa.) If the camber cam nut is corroded or missing, use this cam nut in that position as well. You may need up to four (4) cam nuts per vehicle. s

Rear Adjustment range: Camber/Toe ±1.00° Required: 1 per wheel APPLICATIONS Chevrolet/GMC:

2012 - 15 Captiva Sport 2005 - 17 Equinox 2005 - 17 Terrain

Pontiac: 2006 - 09 Torrent Saturn: 2006 - 09 Vue Suzuki: 2007 - 11 XL-7

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada 131