2022-2023 Total Wheel Alignment Sourcebook

Parts 82370

JEEP REAR PINION ANGLE ADJUSTING BOLTS (PR) Correct rear pinion angle on Jeep TJs & ZJs by replacing the OE bolts on the upper trailing arms with these cam bolts.

Rear Adjustment range: Pinion Angle ±2.00° Required: 1 per axle APPLICATIONS Jeep: 1993 - 98 Grand Cherokee (ZJ) 1997 - 06 Wrangler (TJ)

64225 - Angle Gauge, pg 163

PC has OE replacement and adjustable pin joints for many Dodge, Ram and Jeep plications, see page 74 for more. S ap

82375

JEEP JL FRONT CASTER/ PINION CAMS (PR)

Front Adjustment range: Caster ±1.50° Pinion ±1.50°

Required: 1 per axle APPLICATIONS Jeep:

Correct front pinion and caster issues on your stock or lifted Jeep with this adjustable cam kit from SPC. This kit is designed specifically for the new Jeep Wrangler JL and will provide ±1.5° of adjustment. You will need to slot the axle brackets to get the adjustment you need, use SPC rotary file set #85130 or similar.

2018 - 22 Wrangler (JL) 2020 - 22 Gladiator

85130 - Rotary File Set, pg 169

82376

JEEP JL REAR PINION CAMS (PR)

Front Adjustment range: Caster ±1.50° Pinion ±1.50°

Required: 1 per axle APPLICATIONS Jeep:

Correct rear pinion angle issues on your stock or lifted Jeep with this adjustable cam kit from SPC. This kit is designed specifically for the new Jeep Wrangler JL will provide ±1.5° of adjustment. You will need to slot the holes on your axle brackets to get the adjustment you need, use SPC rotary file set #85130 or simliar.

2018 - 22 Wrangler (JL)

85130 - Rotary File Set, pg 169

82380 82390

JEEP CASTER/PINION ANGLE ADJUSTERS These cams replace the front axle bolt to provide caster and pinion angle (up to ±3° total change). NOTE: Our #82380 is for 1997 - 06 Wrangler TJs, 1993 - 98 Grand Cherokees and 1994 - 98 Ram Trucks with 36mm cams. To elongate OE bolt holes on the #82390 use our knock out punch - # 74910 . Front caster will change as you adjust pinion angle. Use our offset pin joints (#23510-23540 - page 78) for additional caster adjustment and to adjust camber.

Front/Rear Adjustment range: Caster ±1.50°/Pinion Angle ±1.50° Required: 1 per axle 82380 APPLICATIONS Jeep 4WD:

1997 - 06 Wrangler (TJ)

Dodge 4WD: With 36mm cams 1994 - 99 1500 Ram 82390 APPLICATIONS (Front & Rear) Jeep RWD/4WD: 2007 - 18 Wrangler (JK)

Che ou Susp

ck out r JK ension s on ge 69

Arm pa

74910 - Punch, pg 166

82385

DODGE CASTER CAMS (PR) Dodge solid front axled 3/4 and 1-ton trucks equipped with non-adjustable or corroded lower control arm bolts can now replace their OE bolts ( 50mm cams ) with the #82385 Caster Adjustment Cam Kit. These replacement cam bolts provide caster and pinion adjustment up to ±2.00°. Achieve desired alignment settings with or without suspension lift kits along with providing additional positive caster for improved tracking.

Front Adjustment range: Caster ±2.00° Pinion ±2.00° Required: 1 per axle APPLICATIONS Dodge 4WD: 2000 - 09 2500 Ram 2000 - 09 3500 Ram 2006 - 08 1500 Ram Mega Cab Dodge RWD: 2000 - 09 3500 Ram with mono beam

Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada

121