2022-2023 Total Wheel Alignment Sourcebook

Parts 81520

AUDI A4 REAR TOE KIT Restore lost toe adjustment due to frozen or broken adusters on Audi A4 and S4 models with his replacement toe adjuster cam kit. The kit eatures a hex chromate free 700 hour salt spray ested finish and is sold per wheel. Order two its to replace both toe adjusters on a vehicle. t f t k

Rear Adjustment range: Toe ±1.50° Required: 1 per wheel APPLICATIONS Audi: 2002 - 08 A4/ S4/Quattro

2003 - 09 A4/S4/Cabrio/Quattro 2006 - 08 RS4

82070

SOLSTICE/SKY CAM BOLTS Replace corroded or stripped

Front Adjustment range: Camber ±1.00° Caster ±1.00° Rear Adjustment range: Camber ±1.00° Toe ±1.00° Required: 1 per wheel/front 1 per wheel/rear APPLICATIONS Pontiac: 2006 – 10 Solstice Saturn: 2007 – 10 Sky

alignment cam assemblies on the front or rear of the Pontiac Solstice and Saturn Sky with this pair of cam bolts. Use these kits to lock in your alignment adjustment. Pair of cam bolts adjusts camber and caster on the front and camber and toe on the rear.

82080 82085

GM REAR CAMBER & TOE BOLTS Replace the factory torque-to-yield (TTY) rear camber and toe bolts on GM’s Epsilon II platform. GM’s hardware is TTY and needs to be replaced with every alignment and this hardware can be re-torqued in future alignments, so you will only need to replace them once. These kits are sold per wheel and give you the same adjustment range as the factory cam, ±2° for camber or toe. You may find that the factory toe bolt (which is not TTY on hiper strut equipped models) is hard to reach, use SPC’s

82080 Rear Adjustment range: Camber ±2.0° Required: 1 per wheel 82085 Rear Adjustment range: Toe ±2.0° Required: 1 per wheel 82080 & 82085 APPLICATIONS WITHOUT HIPER STRUT SUSPENSION Buick: 2010 Allure; 2010 & LaCrosse 2011 - 17 Regal 82090 AWD OR FWD WITH HIPER STRUT Rear Adjustment range: Camber ±2.00° Toe ±2.00° Required: 1 per wheel APPLICATIONS Buick: 2010 Allure; 2010 - 19 LaCrosse 2011 - 20 Regal/Sportback/TourX Cadillac: 2013 - 19 XTS

82090

D-Bolt socket, #45938 to make adjusting the OE bolt easier.

45938 - D-Bolt Socket for OE Bolt, pg 163

82100

GM REAR CAMBER/TOE BOLTS (PR) Use this pair (2) of cam bolts to double the adjustment range for rear camber and toe on GM’s Epsilon platform. The OE cams only give one degree of change which is often not enough camber and you may quickly run out of toe. The innovative design doubles change to ±2.0° and can be used as both camber and toe adjusters, as needed. Depending on how much change is required, you may need to use #85130 rotary file to elongate the adjustment slot to take full advantage of the max-offset cam. This kit has a hex chromate free finish that is highly corrosion resistant and meets industry leading 700 hour Salt Spray Test requirements (SST).

Rear Adjustment range: Camber ±2.00° Toe ±2.00° Required: Camber and Toe 1 per wheel Camber or Toe 1 kit per axle APPLICATIONS Chevrolet: 2004 - 12 Malibu Pontiac: 2005 - 10 G6 Saab: 2003 - 12 9-3 Saturn: 2007 - 09 Aura

85130 - Rotary File Set, pg 169

118 Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada