2022-2023 Total Wheel Alignment Sourcebook

Parts

75200 BLUE 75400 GREY 75600 YELLOW 75800 RED

EZ Shim ™ FULL CONTACT DUAL ANGLE A Full Contact Dual Angle shim, consisting of only four part numbers, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjust ment changes within .03° toe and .10° camber. ON: Check for caliper to rotor clearance nstalling this part on vehicles equipped ear disc brakes. Some vehicles may e the use of longer bolts . CAUTI when i

Rear Adjustment range: Camber ±1.50°/Toe ±1.50° Required: 1 shim per wheel APPLICATIONS See application charts, pages 7-70 for vehicle models and years. 75200 (Blue) Audi, Chevrolet, Chrysler, Dodge, Eagle, Ford, Geo, Isuzu, Nissan, Pontiac, Plymouth, VW 75400 (Grey) Audi, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, Mercury, Nissan, Olds, Plymouth, Pontiac, Saturn 75600 (Yellow) Buick, Cadillac, Chevrolet, Chrysler, Dodge, Geo, Honda, Hyundai, Kia, Nissan, Olds, Pontiac, Scion, Toyota, VW 75800 (Red) Buick, Cadillac, Chevrolet, Geo, Honda, Hyundai, Kia, Nissan, Olds, Pontiac, VW Available on a handy board set Arms The days of merely shimming a vehicle has given way to complex solutions such as adjustable arms and multilink sets. For over 45 years Specialty Products has been the innovator in modern alignment and continues to lead the industry with the newest in alignment solutions. Rear Adjustment range: Camber ±1.50° Toe ±1.50° Required: 1 per wheel APPLICATIONS FWD ONLY Nissan: 2009 - 14 Cube 2013 - 19 Sentra 2007 - 2011 Versa Pontiac: 2003 - 10 Vibe Toyota: 2003 - 08 Corolla 2003 - 13 Matrix #88700 - page 67 Shims Adjustable From to

with r requir Rec an

ommend use of 10408 bolts (page 69) d 75970 spacers (below) as required

75915 - EZ Shim Cutter (below)

REAR SHIM AND BOLT KIT Adjust rear camber and toe up to ±1.5°on many popular front wheel drive vehicles with this universal shim kit. The kit includes extended length hub bolts so that you will have everything you need to do the job right. to rotor after installation of a camber shim. Specifically designed to be used with the EZ Shim™ when correcting some FWD cars with hub mounted rear disc brakes. ACCESSORIES 75910 DIAL CHART Just dial in the desired change needed for both camber and toe. 75915 CUTTER This cutter is a necessary tool for cutting the EZ Shim™ Its thin cutting blades minimize shim breakage. 75920 MARKER This will mark the areas to be removed. Marks will not rub off, and are easy to see. 75970 SPACER SET (8) This set (4 different sizes - 2 of each) aligns caliper

75910 EZ Shim™ dial Chart lists changes in decimal degrees only.

75915

75920

75970

75610

Improve tire wear, gas mileage and handling by getting alignment into specification. NOTE: Vehicles with rear disc brakes may also need caliper spacer kit #75970 (above).

75915 - Cutter, above

Call for your nearest distributor, product info or www.specprod.com 1-800-525-6505 Technical Assistance • In the USA and Canada

114