2020-2021 Purchasing Guide Volume 2

HVAC | Repair Parts

Time Delay Compressor Protector - Single Phase - Delay On Make - Time Delay Begins After Power Is Applied -

After Delay Cycle Load Is Energized - Timer Resets On Power Interruption Or Thermostat Disconnect - Adjustable Time Delay From 6 Seconds To 8 Minutes - Prevents Rapid Short Cycling Of Motors And Compressors - Mfg #ADM-1 252531

30 Amp Definite Contactor - Single Pole - Warranty/OEM Replacement - 24 Volt Coil - Used On 1.5 Thru 3.5 Ton Condensing Units - Includes Lugs, Spade Terminals And Cover - Mfg #145130 145130

30 Amp Magnetic Line Contactor - Double Pole, Single Throw, Normally Open - 24 Volt Coil - Replaces GE, Honeywell, RBM And Carrier

HN52KC051 - Mfg #252851 252851 | See Footnote

30 Amp Definite Purpose Contactor - Double Pole - 230/240 Volt - Universal Mounting Plate - Replaces Cutler-Hammer, Honeywell and Mars ® - Silver Cadmium Oxide Contacts - Interchangeable Mounting With Many Competitive Contactors - Space Saving Dimensions Allow For Smaller Panels And More Wiring Room - Economically Priced - Mfg #DP302402 145136 | See Footnote

30 Amp Definite Purpose Contactor - Double Pole - 24 Volt Coil- Replaces Cutler-Hammer, Honeywell And MARS - Silver Cadmium Oxide Contacts - Interchangeable Mounting With Many Competitive Contactors - Space Saving Dimensions Allow For Smaller Panels And More Wiring Room - Economically Priced - Mfg #DP30242 252850 | See Footnote

30 Amp Definite Purpose Contactor - Single Pole, Single Throw - 24 Volt Coil - Mfg #252012 252012

30 Amp Definite Purpose Contactor - Three Pole - 120 Volt - Includes Lugs, Spade Terminals and Cover - Conforms To ARI-780/790-97 Standards - Mfg #290193 290193

30 Amp Definite Purpose Contactor - Double Pole - 24 Volt Coil - Includes Lugs, Spade Terminals And Cover - Mfg #252013 252013

40 Amp Definite Purpose Contactor - Double Pole - 24 Volt Coil - Universal Mounting Plate - Includes Lugs, Spade Terminals And Cover - Mfg #252015 252015

30 Amp Definite Purpose Contactor - Three Pole - 24 Volt Coil - Mfg #252856 252856

For Your Information Checking Contactor Operation • Check contactor operation by switching the contactor from the system controls. • Make sure the pressure and overload controls can break the system circuit to prevent contactor operation, if necessary. • Check electrical conductance of the contacts. • Check the voltage source to the coil.

40 Amp Definite Purpose Contactor - Three Pole - 120 Volt - Includes Lugs, Spade Terminals And Cover - Exceeds ARI-780 Standard - Universal Mounting Plate - Mfg #290196 290196

40 Amp Definite Purpose Contactor - Three Pole - 24 Volt Coil - Includes Lugs, Spade Terminals And Cover - Mfg #252859 252859

FYI-0562

WARNING : California Residents, this product contains chemical(s), which is/are known to the State of California to cause cancer and/or birth defects or other reproductive harm. Find more information by visiting hdsupplysolutions.com to review the specific product details.

538

SIGN IN TO YOUR ACCOUNT TO ACCESS PROPERTY-SPECIFIC PRICING.

HVAC