2019 Product Catalog

DC Motors LowVoltage - DC Metric - IP54

Pump

Motors

General Specifications: • Built to IEC ® 34-1 electrical and mechanical standards • IEC 63 and smaller frames supplied with an integral B5 flange or B14 face • Optional B3 rigid base kit available • IEC 71 frame and larger can be field modified for B3 rigid base, B5 flange, or B14 face construction using conversion kits • Tachometer mounting kits available for 71 frames only

Washguard Motors

Features: • Terminal board provided for connections • All metric fasteners

• Easy brush access for field service • Oversize brushes for extended life • High strength rolled steel frame • Die cast aluminum endshields with steel bearing inserts • Permanently lubricated sealed ball bearings • Reversible rotation • Simple 2 lead connection • Convenient wiring access • Tachometer mounting kits available for 71 frames only

Agricultural

Duty Motors

HVAC / Fan Motors

24 Volt - TEFC/TENV - Modular Design

App. Wgt. (lbs)

F.L. Amps DC

“C” Dim. (Inches)

Full Load

Catalog Number

List Price Model Number

DC Voltage

kW/HP

RPM Frame

 Notes

Stock

0.06/1/12 3000 0.06/1/12 1800 0.18/1/4 3000 0.18/1/4 3000 0.18/1/4 1800 0.18/1/4 1800 0.18/1/4 1800 0.37/1/2 3000 0.37/1/2 1800 0.75/1 3000

56 56 63 63 63 63 71 71 71 80 80 80 80

√ 435 980,543 √ 490 980,544

5 6

24 24 24 24 24 24 24 24 24 24 24 24 24

3,3 3,4

5.34 S, US, 12,> 6.34 S, US, 12,> 7.75 S, US, ♠ 7.75 S, US, > 8.75 S, US, ♠ 8.75 S, US, >

M1110025.00 M1110026.00 M1130206.00 M1130296.00 M1130207.00 M1130297.00

Special Voltage Motors

√ 554 CIM34D30FD2 √ 601 CIM34D30FC7 √ 633 CIM34D18FD6 √ 688 CIM34D18FC10

13

11 11 10 10 11 20 20 40 39 65 78

9

13

9

√ 759 42D17FT6 √ 852 42D34FT7 √ 831 42D17FT7 √ 913 4D34FT5 √ 1,158 4D17FT6 √ 1,099 4D34FT6 √ 1,165 4D34FT7

19 23 23 33 52 33 43

10.77 S, US 11.27 S, US 12.27 S, US

098065.00 098066.00 098067.00 108456.00 108455.00 108457.00 108458.00

Definite

Purpose Motors Brake Motors IEC Motors DC Motors 0.75/1 1.5/2

14.14 S, US, 35 14.64 S, US, 35 15.64 S, US, 35

1800

1.1/11/2 3000

3000

17.14 S, US, 35  Note listing on inside back flap Specifications are subject to change without notice

IMPORTANT: IEC 71 and 80 frame motors in this chart are round body and require either B14 face, B5 flange or B3 foot from kits shown on page 314. Note 12 - TENV

Note 35 - Terminal bolts at 12:00 Note ♠ - Dedicated B5 Flange Note > - Dedicated B14 Face

318

NEMA is believed to be the trademark of National Electrical Manufacturers Corporation, and is not owned or controlled by Regal Beloit Corporation.