2018 Equipment & Parts Catalog

FLOW DIVIDERS & MANIFOLDS

Accurate distribution from a metering pump is important to the successful subsurface application of liquid. Only a pressurized system can assure even distribution across the entire swath width.

FLOWDIVIDERS

• Revolutionary piston design ensures unequaled accuracy • Two or more Flow Dividers can be banked together for additional outlets while continuing to provide row-to-row precision • Eliminates the need for orifices, no more hassles with field striping due to plugged orifices, no need to change orifices when you change rates • Completely field repairable without removing distribution lines • Higher tolerance of foreign materials than manifolds & orifices

• Designed for precision farming variable rate technology • CDS-John Blue Company recommends using the specialized check valves listed below for low flow rates

FLOW DIVIDER & FLOW DIVIDER MOUNTS

Description

Outlets

Inlet

Outlet ¼" FPT ¼" FPT ¼" FPT

Maximum Flow/Outlet

Part No.

SS flow divider SS flow divider SS flow divider Manifold mount

6

¾" FPT ¾" FPT 1" FPT

2.25 GPM 2.25 GPM 2.25 GPM

FD-0610 “Exacto Flow” FD-1210 “Exacto Flow” FD-2010 “Exacto Flow”

12 20

113989

Check valve - PVC, Viton seal, 316 SS ball, ¼" hose x ¼" hose, 1 PSI Check valve - PVC, Viton seal, 316 SS ball, ⅜" hose x ⅜" hose, 1 PSI Check valve - PVC, Viton seal, 316 SS ball, ½" hose x ½" hose, 1 PSI

CV-1101-B14 CV-1101-B38 CV-1101-B12

ANHYDROUS AMMONIA SUPPLIES VisaGage II NH3 FLOW MONITOR & BLOCKAGE SYSTEM

STAINLESS STEEL MANIFOLDS Stainless steel manifolds can be used with clear liquids for even dis- tribution when used with high pressure distribution systems such as orifices, coulter injection, or nozzles. By interchanging the orifice size you can adjust the application rate.They are constructed of domestic investment cast stainless steel, which will last for many years. Heavy duty, cast iron manifolds are also available.

4 Outlet Manifolds • 50 PSI rated • ¾" FPT outlet • 1-½" FPT inlet • 304 SS

114015

• Monitor NH3 or N-Serve flow rates from tractor cab • Uses magnetic sensing technology mounted behind VisaGage II Flow Monitors • Manufactured from polymethylpentene chemical resistant bodies with UV protection, polypropylene balls & ball screen, Buna-N O-rings, & aluminum manifolds • Maximum allowed pressure: 100 PSI • Mount sensors to existing VisaGage II units (new magnetic balls included with sensors) • Sensor identifies where magnetic balls are floating in each row during application • Shows both low-flow & no-flow • See visual display & hear audible alarm on control panel • LED light is visible to sides of sensor columns • Each row with distribution problem will be highlighted by a flashing LED light at the row • Correct blockage & alarm resets automatically • “Pause” system to capture problem rows to investigate later • Available as wired, wireless, or ISOBUS compatible • Wireless system displays high flow for broken lines • 2 & 4 row units • On wireless or ISOBUS systems, sections can be defined & rows can be numbered • Free mobile app available

12 & 16 Outlet Manifolds • 250 PSI rated • ¼" FPT outlet • 1" FPT inlet • 304 SS

113934

LIQUID MANIFOLDS

Description

Part No. 114382 113934 114015

16 outlet manifold 12 outlet manifold 4 outlet manifold

228 | INDEPENDENT AG EQUIPMENT PRODUCT CATALOG | PA: 800-345-3546 | OH & IN: 800-848-8460 | www.IndependentAg.com