2015 Whitney Catalog

Whitney Drill Extensions

» DRILL EXTENSION SYSTEM BODY » Standard Right Hand

Body Dia. 5⁄16" 7⁄16" 9⁄16"

EDP No.

Series Length Shank Dia.

» COLLET TYPE DRILL EXTENSION SYSTEM » 4”, 9” and 12” extensions use collets » Accommodates 1/16” thru 5/16” drills » Slim profile gets into places that other collet type extensions cannot accommodate » The threaded type collets eliminate the need for bulky collet nuts » It’s easy to change collets, no special wrenches required » A low cost system for difficult to reach spots

96000 96001 96002 96400 96003 96004 96005 96401

#1 #2 #3 #4 #1 #2 #3 #4

1⁄4"

4"

3⁄8" 1⁄2"

6"

1"

1/4” 5⁄16"

9"

7⁄16" 9⁄16"

3⁄8" 1⁄2"

12"

1"

WWW.WHITNEYTOOL.COM

» COLLETS FOR DRILL EXTENSION SYSTEM

EDP No.

EDP No.

EDP No.

EDP No.

Size SERIES 1 • 1/4” Hex Size 96300 1.5mm (0.590) 96006 1⁄16" (.0625) 96301 2mm (.0787) 96007 5⁄64" (.0781) 96008 No. 43 (.0890) 96009 3⁄32" (.0937) 96010 No. 40 (.0980) 96302 No. 36 (.1065) 96011 7⁄64" (.1094) 96303 3mm (.1181) 96012 1⁄8" (.1250) 96013 No. 30 (.1285) 96304 No. 29 (.1360) 96014 9⁄64" (.1405) 96305 No. 26 (.1470) 96015 5⁄32" (.1562) 96306 4mm (.1575) 96016 No. 21 (.1590) 96364 #58 (0.042) 96365 #56 (0.0465) 96366 #51 (0.067) 96367 #50 (0.07) 96368 #49 (0.073) 96369 #46 (0.081) 96370 #41 (0.096) 96371 #39 (0.0995) 96372 #38 (0.1015) 96373 #31 (0.12) 96374 #27 (0.144) 96375 #25 (0.1495)

Size SERIES 2 • 3/8” Hex Size 96017 11⁄64" (.1719) 96018 3⁄16" (.1875) 96019 No. 11 (.191) 96020 No. 10 (.1395) 96307 5mm (.1968) 96021 13⁄64" (.2031) 96022 7⁄32" (.2187) 96023 15⁄64" (.2344) 96308 6mm (.2362) 96024 1⁄4" (.2500) 96376 3/32” (0.0938) 96377 1/8” (0.125) 96378 #26 (0.147) 96379 #25 (0.1495) 96380 #18 (0.1695) 96381 #17 (0.173) 96382 #16 (0.177) 96383 #15 (0.18) 96384 5.5mm (0.2165) 96385 B (0.238)

Size SERIES 3 • 7/16” Hex Size 96025 1⁄4" (.2500) 96309 F (.2570) 96026 17⁄64" (.2656) 96311 7mm (.2756) 96027 9⁄32" (.2812) 96028 19⁄64" (.2969) 96029 5⁄16" (.3125) 96312 8mm (.3150)

Size SERIES 4 • 13/16” Hex Size 96402 5/16" (0.3125) 96403 8mm (0.315) 96404 21/64" (0.3281) 96405 8.5mm (0.3346) 96406 11/32" (0.3438) 96407 9mm (0.3543) 96408 23/64" (0.3594) 96409 9.5mm (0.374) 96410 3/8" (0.375) 96411 25/64" (0.3906) 96412 10mm (0.3937) 96413 13/32" (0.4062) 96414 27/64" (0.4219) 96415 11mm (0.4331) 96416 7/16" (0.4375) 96417 29/64" (0.4531) 96418 15/32" (0.4688) 96419 12mm (0.4724) 96420 31/64" (0.4844) 96421 1/2" (0.5) 96422 13mm (0.5118) 96423 33/64" (0.5156) 96424 17/32" (0.5313) 96425 35/64" (0.5469) 96426 14mm (0.5512) 96427 9/16" (0.5625)

DRILL EXTENSIONS

need a SPECIAL DIAMETER OR LENGTH?

Fill out a quote request on page 94 or at whitneytool.com!

Ordering Information: Please be sure to specify the quantity, style number, EDP number, diameter, width, and material.

69

whitneytool.com