2014 Locke Supply Co.

CONDUIT REAMERS, BENDERS & TOOLS

PIPE VIPER PVC CONDUIT BENDER

CONDUIT REAMING DRILL HEAD

EMT BOX OFFSET BENDER

Locke# T4969

85091 Conduit Reaming Drill Head 19353 Replacement blades for T4969, T4873 & T0190

• Bends offsets in one easy operation. Insert conduit, depress handle, release and remove conduit. • Makes identical offsets every time • Depress handle to create offset that matches the knockout in box. • Maximum offset of .56" (9/16). Locke# T4868 1811 ¾" EMT Box offset T4869 1810 ½" EMT Box offset

T2386

CONDUIT FITTING SCREWDRIVER REAMER

The PVC Pipe Viper is a Bending Spring. When inserted into a PVC Pipe, it will bend the pipe leaving no adverse effect to the pipe. The PVC pipe Viper will allow the PVC to retain its original inner diameter. The PVC Pipe Viper takes only seconds to bend PVC. Locke# Size T1090 RSB1/2PVCPB ½" T1091 RSB3/4PVCPB ¾" T1092 RSB1PVCPB 1"

Locke# T4873

85191 Screwdriver Reamer 19353 Replacement blades for T4969, T4873 & T0190

T2386

BEND ALL CABLE BENDER

"PAL" THIN WALL CONDUIT REAMER

• Bend inside enclosures to the right or left, front or back • Machined from 6061 aircraft aluminum

EMT HAND BENDERS

• Your feeders will lie in the lugs • Bends wire from #3 to 350mcm • Fits a standard ½" ratchet. Locke# T4134 77455 Cable Bender

Locks onto screwdriver, reams & smooths ½", ¾" & 1" thin-wall conduit ends to protect wire & permit correct installation of fittings. Reams inside & outside at the same time. Locke# T0190 19352 Conduit Reamer T2386 19353 Replacement blades for T4969, vT4873 & T0190 BENDER HANDLES High-strength galvanized steel handles are threaded at one end. Informative bending guide on every handle. Locke# T0818 51427 ¾" x 38" Handle T0819 51428 1" x 44" Handle

Cast-in markings for stub-ups, saddle bends, back-to-back bends, and head-up or down

bending Locke# T0655

LASER PLUMB BOB Enables you to lay out overhead work on the ground and then quickly

840A ½" EMT Bender 841A ¾" EMT or ½" Rigid

T0656

T

transfer the measurements to the ceiling. Easy to set up and operate.

| TOOLS

EMT BENDERS

• Solid brass construction • Self leveling and aligning (vertically) • Durable plastic carry case Locke# T4133 88455 Laser Plumb Bob

Locke# T0815

56200 ½" EMT Bender 56209 ¾" EMT, ½" Rigid 56202 1" EMT, ¾" Rigid

T0816 T0817

Credit: 405-631-9756

981

www.lockesupply.com