2014 Locke Supply Co.

SEAMER, HAMMER, FOLDING TOOLS & DUCT STRETCHER

SETTING HAMMERS

FOLDING TOOL 3/8" AND 1"

DUCT STRETCHER

The low profile, straight body is designed to go anywhere, even in the tightest quarters. Locke# T1202 DS1 Duct Stretcher

Full polished finish with polished face and pein. Faces and peins are beveled. Leather Handles. Locke# T0065 SH3 12" Setting Hammer

Makes 3/8" folds for drive cleats, 1" bends for joist panning and more. Locke# T1233 12F 12" Folding tool T1234 18F 18" Folding tool T1231 24F 24" Folding tool

DUCT STRETCHER

Same features as the DS1 plus offset handle to eliminate knuckle contact. Locke# T1203 DS2 Offset Handle Duct Stretcher

POCKET SIZE SHEET METAL SCRIBE

SHEET METAL SCRIBER

WHEEL NUT SCREWS

Locke# T1204

DS1 C Wheel Nut Screws for T1202 and T1203

Rotate the sciber extension & knob end to end for depths over 6½". Constructed of rust resistant nickel plated steel. Locke# T1281 A60 Scribes ¼" to 12½" depths

• Five teeth produce 10 scribing depths. • Compact scribe stores in pocket, pouch or tool box. • Use hang hole or magnet to keep handy on-the-job.

DIVIDERS

T0068

T0069

T

Accurate and fast adjusting. 2 sizes for circles up to 36" and 48". Scribes a thin, accurate line time after time. Expertly heat treated scratch awl points are easily resharpenable or replaced. Nickel plated steel body. Locke# T0068 18 11" Dividers T0069 24 13½" Dividers T2009 RP2 Replacement points for T0068 and T0069

| TOOLS

Scribe commonplace trim lines on galvanized sheet metal quickly and accurately. Ten pre-set scribing depths from 8 " to 1". Each scribing depth size features a dual edged point to create clean, readable and accurate score lines parallel to the edge of the metal sheet. Corrosion resistant finish and etched- in dimensions are readable for life of tool. Packaged in a clear vinyl, reusable pouch for storage in pocket, pouch or tool box. Locke# T1282 A40 Pocket Scribe

Credit: 405-631-9756

975

www.lockesupply.com