2014 Locke Supply Co.

METERS

Dual-POrt ManOMeter accessOry HeaD Static Pressure/Gas Pressure Differential • Inches of Water column, mBar • Use to find static pressure drops • Locate duct blockages • Find the pressure change across a fan • Range: -60.0 to +60.0 inches WC • Resolution: down to 0.01 inches WC • Hoses included (5 feet) lo‘k# t1453 ADMN2 Dual-Port Manometer accessory head static Pressure PrObes FOr ManOMeters Use to measure duct • Check gas pressure • Auto off to conserve battery life • Accuracy: ± 1.5% FS

VacuuM gauge accessOry HeaD

Deluxe silicOne test leaDs

• Removable probe tips. • High copper stranding, silicone insulated test leads. • Basket style strain relief. • Fit in test lead holders on back of SC series clamp meters and HS30 series Stick meters. lo‘k# t1458 ADLS2 Deluxe Test Leads

• See pressure drop from atmospheric to under 2000 microns. • Handles pressure overloads • Excellent accuracy • Temperature compensation lo‘k# t1455

4.5˝ Piercing PrObe witH HanDle

AVG2 Vacuum gauge accessory head

NSF rated for food. Maximum °F (probe) 1500

static pressure the right way. The magnetic flange and painted arrow ensure proper orientation and allow hands free use.

lo‘k# t1460

ATR1 Piercing Probe

relatiVe HuMiDity HeaD M•€~€ tmp •„d rH% c•Š‘~Š•€ y ”~Š” •„d dy poŒ„ mp•~€

lo‘k# t1776

ASP2 Static Pressure Probes

K-tyPe, cliP-On wet bulb tHerMOcOuPle

air VelOcity anD air teMPerature accessOry HeaD Designed to measure air velocity and air

An inexpensive and effective way to take a wet bulb measurement. The ATWB1 is equipped with a durable hydrophillic sock specifically designed for wet bulb measurements. The alligator clip allows the user to affix the ATWB1 to a fixed surface, such as a vent, allowing the user to take hands free measurements. The ATWB1 also comes with a wrap tab making it easy to wind and store the thermocouple. The ATWB1, K-Type thermocouple can be used continuously to take temperature readings up to 150°F and can be used with any thermometer which accepts a K-type thermocouple. lo‘k# t1459 ATWB1 K-Type clip-on wet bulb thermocouple

temperature. It can be used to estimate CFM (cubic feet/ minute). You can measure air velocity in feet/ minute, miles/hour, meters/ second, or kilometers/hour. The AAV3 also measures temperature in °C or °F.

T

• Low battery indication: Red LED is lit when the voltage drops below the operating level. • Output impedance: 500Ω approx. • Operating environment: 32°F to 120°F at <95%RH. • Storage temperature: -4°F to 140°F <80% RH with battery removed. • Range: 32°F to 140°F • Accuracy: ±1°F (32° - 113°F) • Battery: 9V • Dimensions: 146mm(H) x 67mm(W) x 32mm(D) • Weight: 180g including battery approx. • Warranty: 1 year lo‘k# t1454 ARH4 Relative humidity head

| TOOLS

lo‘k# t1456

AAV3 Air velocity and air temperature accessory head

M•Œ„ Offi‘: 405-631-9701

962

F•x: 405-631-0585