2014 Locke Supply Co.

CONDENSER TOOLS & THERMOMETERS

FIN COMB

INFRARED AND CONTACT THERMOMETER • Single-point laser

JUGLUGGER REFRIGERANT STRAP

sighting for quick measurements up close or at a distance • Temperature range:

-40°F to +1022°F (-40°C to +550°C) • Contact thermometry capability, compatible with all standard mini-connector K-type thermocouples • Velcro® pipe probe included for superheat and subcooling, and other contact and ambient measurements • Easy emissivity adjustment for measuring pipes and ducts more accurately • MIN/MAX and differential functions quickly identify problems • Includes hard carry case • Two-year warranty • Users manual Locke# T1470 561 Infrared and Contact Thermometer

One-piece adjustable combs. The resilient nylon comb material will not damage the soft aluminum fins of condenser or evaporator units. Malco fin tools function by either pushing or pulling and efficiently straighten fins in tight quarters or where multiple passes over bent fins are required. Comfortable offset handles provide a sure grip and protect knuckles from scraping. Locke# T4951 FST Fin Comb 8,10,12 Or 14 Fins Per Inch T4952 FST2 Fin Comb 16,18,20, Or 22 Fins Per Inch SIDEKICK CONDENSER CLEANING TOOL 30" tube with overall length of 33" lets you clean those hard to reach areas. Locke# T1674 0230 Condenser Cleaning Tool

Save trips to and from your service truck to job sites by using the JugLugger® refrigerant strap. Use it to carry heavy cylinders and tools from your service truck to the job site. The rugged shoulder pad is covered with high quality, heavy duty Nylon and a special anti- slip fabric to keep it secure on your shoulder. The adjustable, high strength strap and 1/2" zinc plated steel snap rings make it to carry heavy gear. Locke# T2627 Juglugger Refrigerant Strap

FIN COMB

VISUAL INFRARED THERMOMETER

• Infrared thermometer with thermal imaging capabilities for noncontact surface temperature measurement for use in monitoring electrical, mechanical, industrial, HVAC, and automotive systems • Measures temperature from -10 to +250 degrees C (14 to 482 degrees F) with an accuracy of + or - 2 degrees C or + or - 2% of the reading, whichever is greater, and a thermal sensitivity of less than or equal to 250mK

"PH" Series fin comb for shorter fins. Locke# T0008 61154 12" & 14" Fin Comb T0025 61155 16" & 17" Fin Comb T0026 61156 18" & 20" Fin Comb T0027 61157 21 / 22 & 23 / 24 " fin comb

THREADED ROD CUTTER

T

FIN COMB

• Uncooled pyroelectric ceramic sensor captures thermal and visual images of the target and works at a minimum distance of 50cm • Thermal camera with LCD screen blends the visual and infrared images in 25% increments for inspection of full visual, incrementally blended, or full infrared images • Included SD memory card stores up to 10,000 images for inspection, analysis, and reporting on a computer Locke# T1905 VT-02 Visual Infrared Thermometer

• Designed to cut mild steel threaded rod. • Unique die design protects the threaded rod from damage while cutting. • No cleaning or deburring work necessary after cutting. Just screw the nut on the cut end. • Double sided easy to replace dies. Locke# T3300 AB-3U 3/8" Threaded Rod Cutter

| TOOLS

Cleans and straightens fins for better operating efficiency. Features sliding tension bar, stainless steel teeth and "knuckle saver" handle. Locke# T0024 MA-MFC2 Fin Comb

Mai„ Offic: 405-631-9701

956

Fax: 405-631-0585