2014 Locke Supply Co.

PVC DRAINS AND BACKWATER VALVES

FLOOR SINK with Aluminum Beehive Strainer, 3”

FLUSH-FIT SNAP-IN DRAIN

ROOF DRAIN

PVC roof drain with cast iron dome

Locke# R1020

4" Roof Drain

Sink has 14” x 14” square top, 12” diameter grate hole. 5½” deep sump area. Interior surfaces are sloped and smooth to allow maximum sanitation. Locke# R1202 3" With NO Grate R1204 Full Grate only for R1202 R1205 ¾ grate only for R1202 R1207 Replacement aluminum beehive strainer

• All plastic • May be solvent welded or simply inserted in pipe • Allows cutting pipe flush with floor • May be used as a strainer for vent stack or air inlet • Fits Schedule 40 PVC DWV pipe Locke# R1030 2" Snap-In Drain R1031 3" Snap-In Drain R1032 4" Snap-In Drain

ADJUSTABLE ON-GRADE FLOOR DRAIN with Cast Metal Ring & Strainer • Highly polished cast metal top provides a fantastic finished look. • Standard threads on drain throat for easy adaptability to any standard FIP adapter. • Brass female thread inserts for strainer screws. Locke# R1199 843-36PNR 3" Drain with cover

VERY COMPETITIVE FLOOR SINK DRAIN

INSERT PLUGS

Fits 3" PVC couplings / fitting hubs.

HEAVY DUTY FLOOR DRAINS WITH META RING

Locke# R1212

3" PVC Floor Sink,12x12 flange Full grate only for R1212 Drain ¾" Grate only for R1212 Drain 3" bottom alum. dome strainer

DWV plastic insert plugs used to close off drains for pressure test. Locke# R0808 1½" Insert Plug R0809 2" Insert Plug R0810 3" Insert Plug R0811 4" Insert Plug

R1214 R1215 R1216

Locke# R1200

3" Heavy Duty Floor Drain

R1198

3" Floor drain with trap primer, use with M0566 Auto. Trap Primer Strainer for 5" Nickel bronze for R1198 and R1200

R1196

PVC FLOOR DRAIN 6½"Round nickel Ring &

Strainer. 2" Connection Size. Adjustable AFTER the pour. ABS/PVC Base Adapter, ABS Coring Sleeve and Head Adapter.

R

PLASTIC TEST CAP

3"-4" ADJUSTABLE CLEAN-OUT WITH META RING

| PLASTIC PIPE

Locke# R1203 R1206

832-2PNR 2" PVC floor drain 832-36PNR 3" PVC floor drain

Locke# R0812

Fits over 3" & inside 4" schedule 40 pipe & 6" diameter access cover, PVC. 3" IPS tailpiece adjusts to desired finish level.

1½" & 2" DWV pipe test cap 3" & 4" DWV pipe test cap

R0813

PVC FLOOR DRAIN

Locke# R1201

GLUE ON TEST CAP

3" Adjustable Clean-out

One piece. Only one glue joint needed to install. Full 3" evaporation seal built-in trap. Unbreakable strainer with 2 screws. Locke# R0972 800P 2" PVC flr drain with c.o.

DRAIN GRATE

Locke# R0814 R0815 R0816 R0817

1½" DWV End Cap, glue on 2" DWV End Cap, glue on 3" DWV End Cap, glue on 4" DWV End Cap, glue on

Locke# R0640

4" Drain Grate

Credit: 405-631-9756

865

www.lockesupply.com