2014 Locke Supply Co.

TAKE OFFS & DAMPERS

"AIR-TITE" TAKE OFFS All "Air Tite" take offs have a neoprene gasket with an adhesive backing for easy install. The backing is protected with paper for storage & handling to keep dust from the adhesive. When ready to install "Air Tite" take offs, simply peel protective paper away from unit & apply unit to plenum. Once desired position is located, press firmly to sure a good seal. After take off has been sealed to plenum, secure with sheet metal screws. This will assure air tight seal & give the needed support for the duct work. On the duct board longer screws & back plates should be used to strengthen duct board.

ATT STRAIGHT THRU START COLLAR

AT/SD START COLLAR 26 GAUGE Locke# L1364 6" AT/SD Start Collar with Damper & Scoop L1365 7" AT/SD Start Collar with Damper & Scoop L1366 8" AT/SD Start Collar with Damper & Scoop L1367 9" AT/SD Start Collar with Damper & Scoop L1368 10" AT/SD Start Collar with Damper & Scoop L1369 12" AT/SD Start Collar with Damper & Scoop L1370 14" AT/SD Start Collar with Damper & Scoop SADDLE TyPE TAKE OFF WITH GASKET, ROUND PIPE APPLICATION Locke# L2420 4" Rnd CATT; 26 Gauge Start Collar less Damper L2421 5" Rnd CATT; 26 Gauge Start Collar less Damper L2422 6" Rnd CATT; 26 Gauge Start Collar less Damper L2423 7" Rnd CATT; 26 Gauge Start Collar less Damper L2424 8" Rnd CATT; 26 Gauge Start Collar less Damper L2425 9" Rnd CATT; 26 Gauge Start Collar less Damper L2426 10" Rnd CATT; 26 Gauge Start Collar less Damper L2427 12" Rnd CATT; 26 Gauge Start Collar less Damper

Locke# L1349

4" ATT Start Collar less Damper, 26 Gauge 5" ATT Start Collar less Damper, 26 Gauge 6" ATT Start Collar less Damper, 26 Gauge 7" ATT Start Collar less Damper, 26 Gauge 8" ATT Start Collar less Damper, 26 Gauge 9" ATT Start Collar less Damper, 26 Gauge 10" ATT Start Collar less Damper, 26 Gauge 12" ATT Start Collar less Damper, 26 Gauge 14" ATT Start Collar less Damper, 26 Gauge 16" ATT Start Collar less Damper, 26 Gauge 18" ATT Start Collar less Damper, 26 Gauge 20" ATT Start Collar less Damper, 26 Gauge

L1348

L1350

L1351

L1352

L1353

L1354

L1355

L1356

L1378

L1379

L1380

ATD START COLLAR WITH DAMPER Locke# L1357 6" ATD Start Collar with Damper, 26 Gauge L1358 7" ATD Start Collar with Damper, 26 Gauge L1359 8" ATD Start Collar with Damper, 26 Gauge L1360 9" ATD Start Collar with Damper, 26 Gauge L1361 10" ATD Start Collar with Damper, 26 Gauge L1362 12" ATD Start Collar with Damper, 26 Gauge L1363 14" ATD Start Collar with Damper, 26 Gauge

L

L2428

| HVAC

DAMPERS ONLy- COMPLETE WITH ALL HARDWARE ASSEMBLED

ATT RECTANGULAR TO ROUND BOX

Locke# L1381

5" Damper with Hardware, 26 Gauge 6" Damper with Hardware, 26 Gauge 7" Damper with Hardware, 26 Gauge 8" Damper with Hardware, 26 Gauge 9" Damper with Hardware, 26 GaugeL137510" Damper with Hardware, 26 GaugeL137612" Damper with Hardware, 26 Gauge 14" Damper with Hardware, 26 Gauge

L1371

Locke# L2428

14"x14"x12" Rect. to Rnd Ceiling Box, 30ga.

L1372

L1373

BLACK JACK NON-FIBERED COATING FOR DUCT WORK

L1374

L1377

Locke# M0732

1 Gal. Non-fibered Roof Coating

Credit: 405-631-9756

521

www.lockesupplw.com