2014 Locke Supply Co.

WARM AIR PVC DUCT PIPE & FITTINGS & AIR BOOSTER FANS

SUREBOND EVERSEAL CEMENT Works for BlackMax

TM

START COLLARS

AIR BOOSTER FANS

Locke# Size R0558

4" Start Collar 6" Start Collar 8" Start Collar

R0559 R0560 R0561 R0562 R0564

MADE IN AMERICA! Put more hot air or cold air in any room you want. The Robin Hood Certified Series is designed to increase the flow of hot or cold air to any desired room. It is installed "in line" with round ducts. The housing of the Robin Hood is made of standard galvanized duct material with a female receptacle collar on the incoming end and a male "crimped" collar on the outgoing end so that it can be fitted right into a cutout section of standard round duct. • Have impedance or thermal protection • Product has full 1 year limited warranty Installation in square, or rectangular duct can be made with use of sheet metal adapters. Locke# Vendor# CFM Size L1870 CSR6 240 CFM 6"dia x 7¼" L1871 CSR8 420 CFM 8"dia x 7¼" L1872 CSR10 650 CFM 10"dia x 8" L1873 CSR12 1150CFM 12"dia x 8¾" L1874 CSR14 1500 CFM 14"dia x 8¾" • All motors are UL listed • Permanently lubricated

10" PVC Air Duct Start Collar 12" PVC Air Duct Start Collar 14" PVC Air Duct Start Collar

Must be used on all Black Max Saddle Boots & L-Bar Support Brackets. Use SB-190 Everseal & bond plastic pipe, ells, wyes, floor boxes, reducers, tees & junction boxes for under slab duct work. Excellent high impact seals that are strong & long lasting. (apply SB- 190 & produce an outer filter.) Locke# R0086 SB-190 Cement Cartridge

COUPLINGS

Locke# Size R0610

6" PVC Air Duct Coupling 8" PVC Air Duct Coupling 10" PVC Air Duct Coupling 12" PVC Air Duct Coupling

R0611 R0612 R0613

PVC CEMENT

For warm air duct Locke# R0085

L

PLENUM ELBOW

1836S 1 Quart PVC Cement

| HVAC

Locke# R0464 R0462 R0463 R0576 R0447 R0548 R0549 R0550 R0579

AIR DUCT ADHESIVE WITH DAUBER

12" x 16" x 48" Elbow 12" x 18" x 60" Elbow 12" x 18" x 72" Elbow 12" x 18" x 96" Elbow 12" x 18" x 120" Elbow 14" x 16" x 48" Elbow 14" x 18" x 60" Elbow 14" x 18" x 72" Elbow 14" x 18" x 96" Elbow

HOTPOD SUPPLEMENTAL DUCT MOUNTED HEATING SySTEM

Light bodied, fast setting, contact adhesive for polyethylene, poly-propylene, PVC, ABS & Styrene non-pressure drainage systems through 4" diameter, HVAC duct applications. Locke# R0087 1 Quart Air Duct Adhesive

45 DEGREE ELBOW

MADE IN THE USA! • Use to heat cold rooms or additions without upgrading central system • Fan only operation for increased cfm output for A/C cycles • 6" 1000/500 Watt and 8" 1440/720 Watt models available • Two stage operation • Zero clearance for all models • Includes UT8003 low voltage thermostat Locke# L1847 HP6-1000120-2T 6" Hot Pod L1848 HP8-1440120-2T 8" Hot Pod

PVC END CAPS

Locke# Size R0862

4" 45° Elbow

R0448 R0449 R0450 R0451

6" PVC Air Duct 45° Elbow 8" PVC Air Duct 45° Elbow 10" PVC Air Duct 45° Elbow 12" PVC Air Duct 45° Elbow

Locke# Size R0544

6" PVC End Cap 8" PVC End Cap 10" PVC End Cap 12" PVC End Cap

R0545 R0546 R0547

Credit: 405-631-9756

519

www.lockesupplw.com