2014 Locke Supply Co.

SHAFTS, RAINSHIELD, BRACKETS & PULLEYS

SLEEVE BEARING BRACKET KIT

PILLOW BLOCK BEARINGS

SHAFTS When a bearing fails, the shaft is inevitably scored. If not replaced it will destroy the new bearings. Premium shafting is ground and polished to a mirror finish. Excess shaft may be cut off. Locke# L0925 38-2096-01 ¾" x 20" Shaft L2732 38-2095-01 1" x 25" Shaft L2733 38-2492-01 1" x 35" Shaft

Heavy neoprene cushioned. Re-oilable porous bronze bushing in a pressed steel ball unit held firmly in a housing of two-piece interlocking steel. Self-aligning, static free and quiet operating. Two 8 " rubber spacers provided for use if needed. Locke# L0924 38-2086-01 Pillow Block Bearings - ¾" Shaft Diameter

Ideal for replacing obsolete pillow blocks and streamlined bearings. May also be used in some evaporative cooler applications. Locke# L2750 029175-01 ¾" Bearing Bracket L2751 029176-01 1" Bearing Bracket

THRUST COLLAR KIT

PILLOW BLOCK BALL BEARINGS

SLEEVE SEALED TyPE BEARING WITH INSULATOR

Self-aligning, factory packed with plastic petroleum assuring proper lubrication during long life of bearing. Self-aligning porous bronze sleeve.

Sheet metal thrust collar in ¾", s " & 1" size. All with hollow head (Allen) set screws. Kit consists of 1 pr. packaged with thrust washers. Locke# L2744 38-2207-01 1" Thrust Collar Kit

Temperature Range: -30 to 200 ° F. Durable cast-iron construction, pre-lubricated bearings, & re-greasable. Locke# L2739 38-2567-01 ¾" Pillow Block Ball Bearing - pair L2740 38-2568-01 1" Pillow Block Ball Bearing - pair

L

Locke# L2734

38-2443-03 1" I.D. x 2½" O.D. as measured over rubber cushion.

| HVAC

VARIABLE PITCH MOTOR PULLEyS

OIL SLEEVE BEARINGS (Replaces Brundage) Self-oiling with sintered bronze bushings and drive type oil cups.

Precision built for perfect balance, to assure smooth, vibration free performance. Permits speed variation of approximately 30%. Grooves are accurately finished for proper belt seating, insuring max. drive efficiency and long belt life.

PILLOW BLOCK SLEEVE BEARINGS

Locke# L2736

Finished for corrosion resistance and tested for true running. (Standard Keyway on all sizes except ½".) Locke# L2721 270-069-01 ½" x 3¼" Cast Iron Motor Pulley L2722 270-072-01 s " x 3¼" Cast Iron Motor Pulley L2723 270-089-17 ½" x 4" Cast Iron Motor Pulley L2724 270-089-12 s " x 4" Cast Iron Motor Pulley

38-2696-01 ¾" I.D. x 2 z " O.D. as measured over rubber cushion

Heavy neoprene cushioned. Re-oilable porous bronze bushing in a pressed steel ball unit held firmly in a housing of 2-piece interlocking steel. Self-aligning, static free and quiet operating. This high quality pillow block will assure many years of trouble-free performance. Locke# L2738 38-2087-01 1" Pillow Block Bearing - pair

RANDALL OIL TyPE BEARINGS WITH INSULATOR

Self-aligning, self-oiling with sintered bronze bushings and drive type oil cups.

Locke# L0926

38-2450-01 ¾" Shaft Dia., 1 A " O.D.

Credit: 405-631-9756

495

www.lockesupplw.com