2014 Locke Supply Co.

VENT SYSTEMS & MOTORS

FAN COIL REPLACEMENT MOTOR

SOS™MULTI-HORSEPOWER OUTDOOR "WIZARD" CONDENSER FAN MOTOR Fits in many 1/3 HP installations that

CONDENSER MOTORS

Features: • Thermal protection • Quiet sleeve bearings

will not accept other motors. The 03458 is a single speed “wide-range” motor

Locke# Model HP Volts Speed FLA L5235 WG840204 1/4 208-230 825/1 1.5 L5236 WG840205 1/3 208-230 825/1 2.2

• Includes resilient mounting base • Includes female ¼" spade terminals Specifications: • Single phase, 60 Hertz • Fan duty continuous air over

that will run at any fan load from 1/6 to 1/3 HP at a nominal RPM. Easy mounting in Rheem applications. • Ball Bearings • Reversible Rotation • Water slinger on shaft • Air conditioning or heat pump duty • End Shield drain holes w/plugs

DIRECT DRIVE MOTORS

• Single phase, 60 Hz • Overload protection • Fan duty, continuous air over • Totally enclosed, Non-ventillated • Class B insulation Locke# L5179

Locke# Model#

L5098 10889

H.P.

1/10

Locke# Model HP Volts Speed L5237 WG840589 3/4 115 1075/3 L5238 WG840590 3/4 208-230 1075/3

Hz

60

Volts Amps

115v

EM3458 1/6-1/3hp 1075rpm EM3458 1/6-1/3hp 825rpm

3.5

L5180

ROT LE

95

A B C D

10.3" 3.34" 10.3"

L

THROUGH-THE-WALL VENT SySTEM

1/2"

UTILITy MOTORS EM670 SERIES

| HVAC

"CAP-CAN" CONSTRUCTION VERTICAL SHAFT DOWN CONDENSER FAN AND HEAT PUMP MOTOR

Designed for use in residential outdoor condenser fan and heat pump units (primarily up to 3.5 tons), requiring vertical shaft down with stud or flange

Features: • Replaces both "C-Frame" & "3½" round motors • Kits & individual models available • Reversible single & 2 speed types

Your best choice for electric to gas conversions, renovations, new construction, & deteriorated chimneys. • Factory wired for fast, easy installation • Built-in Fan Proving Switch interlocks with gas valve. • Kit includes everything for complete installation, (except vent pipe). • Timer Relay; Dual Voltage 1-10 min. Adjust. Relay • Fan Proving Switch; 3FLA, 18LRA @ 120VAC, 95w, Thermally protected Locke# L5105 GPAK-JT Vent System

mounting. • Automatic thermal overload protection • #8-32 extended stud or flange mount • Water slinger on shaft • Vertical shaft down mounting orientation • CCW rotation in several ratings • Designed for 370 volt capacitor (not included) • Single speed • 60 Hz • 208-230 volts • 1/2" shaft diameter • 26" leads • Continuous duty, air over Locke# L5103 EM2247 1/6hp 1100rpm

Locke# Part# Volts Shaft

Size RPM Stack

L5046 670 Kit 120 ¼" &

c " 3000 5/8"

L5047 672 Kit 240 ¼" & c " 3000 5/8" Includes: One each FB402 4" CW and FB550 5½" CCW blades, hub adapter, mounting bracket, ¼" shaft adapter & 5/16" shaft adapter.

Credit: 405-631-9756

485

www.lockesupplw.com