2014 Locke Supply Co.

PILOT CONTROL MODULES, GENERATORS & GAS VALVES

PG9 PILOT GENERATOR

36C SERIES HSI PROVEN PILOT GAS VALVES For use on spark or Hot Surface Ignition systems and Replaces Many O.E.M. Gas Valves

GAS BURNER CONTROLS

Type "36c" universal replacement. Complete gas control with side taps. Locke# L0769 L0768 Model# 36C03-333 36C03-300

Output Voltage: 750 millivolt cartridge. Leads: 2 wire, 32" standard. Base Fitting: A ¼" OD tube straight (TL) base fitting is standard. Angle base fitting (TJ) is available for replacement of a former model having an angle fitting. Order separately Part No. 10194 HD (add orifice size). Orifice: These models are standard with screw base orifice for Natural Gas installed. An orifice for LPG is furnished separately. Locke# L0561 PG9 Pilot Generator for Floor Furnace

24VAC, 60 Hz

Coil Voltage 24VAC, 60 Hz

FEATURES • May be mounted in any position except upside down. • Inlet screen and pilot gas filter provide maximum protection against chips and dirt. • Gas cock knob and regulator adjustment (on some models) are on top of valve for quick setup. • Large, easy-grip pipe boss speeds installation. SPECIFICATIONS: Electrical Rating: 0.6 amps Coil Voltage: 24VAC Gas T pe: Natural Opening Characteristics: Fast Open Regulator Adjustment Range: 2.5" - 5.0" End to End Dimensions: 3 15/16" Ambient Operating Range: –40 to +175°F Maximum Pressure Rating: ½ psi (14.0" W.C) 1" Pressure Drop capacit , ¾" x ¾": 280,000 Btu/Hr 1" Pressure Drop Capacit , ½" x ½": 230,000 Btu/Hr Agenc : A.G.A. and C.G.A design certified Locke# L2458 36C68-423 Universal Electronic Ignition Gas Valve

Inlet-Outlet Size ½" x ¾"

½" x ¾"

Capacity A.G.A. Standard Gas*

250,000 250,000

Gas Type

Natural

Natural

L.P. Conversion Kit Reducer Bushing Kit

Yes

No

Yes

No

Side Taps

Yes

Yes

L

250/750 MILLIVOLT POWER GENERATOR

| HVAC

SLOW OPENING COMBINATION GAS VALVE This Complete Compact

Gas Control Combines The Functions Of 3-position Gas Cock, Pressure Regulator, 100% Shut-off Automated Pilot And Main Operator. The Slow Opening Main Valve Provides A Softer

Ignition. • Valve can be mounted in any position, except upside down. • Both main valve seat & line-interrupter seal w/line pressure. • For LP, use conversion kits, F92-0737 or F92-0659 (order separately). • Thermocouple connection and combination tab-screw terminals provided. • E.C.O. terminal w/ jumper wire included.; A.G.A. design certified & C.G.A. certified. Locke# L0873 Model# 36C53-418 Coil Voltage 24VAC, 60 Hz Inlet-outlet Size ¾" x ¾’ Capacity A.G.A. Standard Gas 280,000 Gas Type Natural Reducer Bushing Kit Yes

Provides power for 250/750 millivolt self- generation control systems. Features: • For replacement of similar screw-in type generators now in field or for use w/ type E31-12 pilot burner, except G01A-501 is used with ITT General PG9 pilot burner only. • Has 36" armored cable leads w/ split-spade terminals. • PG9 adapter included with each G01A-332. PG-9 adapter also offered individually. Locke# L0574 750 mV with 36" leads (armored cable) & PG9 adapter

Main Office: 405-631-9701

456

Fax: 405-631-0585