2014 Locke Supply Co.

HOT WATER CIRCULATING PUMPS & THERMAL EXPANSION TANKS

SUPERBRUTE CAST IRON HYDRONIC HEATING CIRCULATING PUMP

UP 10-16 "COMFORT" PUMP Now you can get instant hot water with the new "Comfort" pump. • Maintenance Free • Whisper Quiet • Unique Wet Rotor Design • Built-in Timer and Aquastat 1¼" Union, check valve and isolation valve Locke# E1167 UP10-16BU ATLC Pump

COMFORT SERIES INSTANT HOT WATER SYSTEM No Return Line Required

For circulating chilled or hot water. 3 speed motor. Integral check valve.

Locke# E0314

UPS15-58FC 15/26 Flange mount Cast Iron 3 Speed Pump UPS15-35SFC 115v, 3-speed 1/15 HP, Stainless Steel Body, Internal check valve, uses GF 15/26 flange mount UPS26-99FC 115v 1/6hp Cast Iron Body 3 Speed Pump UPS26-99FC 230v 1/6hp Cast Iron Body 3 Speed Pump UPS43-44FC 115v 1/6hp Cast Iron Body 3 Speed Pump UPS43-44FC 230v 1/6hp Cast Iron Body 3 Speed Pump UP15-42F 115V Brute 1 Speed Cast Iron 1/25 HP 539605 1½" Cast Iron Flange for E0675 & E0674 519602 1" Iron Flange Set for Cast Iron Pumps only 519601 ¾" Iron Flange Set for Cast Iron Pumps only UPS26-99BFC 115v 1/6hp Bronze Body 3 Speed Pump UPS43-44BFC 115v 1/6hp Bronze Body 3 Speed Pump 539615 1½" Bronze Flange for E0678 519651 GF 15/26 ¾" Bronze flange set 519652 GF 15/26 1" Bronze flange set

E

E1170

| WATERHEATERS True Retrofit Design The Grundfos Comfort System does not require an additional ‘return line’. The Comfort System uses a patented Comfort Valve and pump to provide

THERMAL EXPANSION TANKS INLINE MODEL

E0672

E0673

E0674

instant availability of hot water at the point of use. The Comfort Valve is installed at the furthest fixture from the Hot Water Tank. With a built in timer the pump allows hot water to

E0675

E1177

E1144

E0310

circulate along the loop through the Valve using the cold water side as a return line. As the temperature rises to 100° the valve closes directing hot water to the tap, resulting in a constant availability of hot water. The Comfort System saves up to 16,000 gallons of water per year, per household and uses less energy than a 25-watt light bulb. Flow Range: 0 TO 3.4 u.s. GPM Motor: Single Phase, 115V Max. Working Pressure: 145 PSI Timer: 24hr, 3 position, 15 minute intervals. Includes: Pump and one comfort valve Locke# E0312 UP15-10SU7PTLC Comfort Series Instant Hot Water System

E0315

Expanded (heated) water is absorbed which means the water heater and fixtures are protected • Polypropylene liner. • Rugged flexible butyl diaphragm. • 200° F operating temperature. • 150 PSIG working pressure. • 40 PSIG standard factory pre-charge. • Use with most standard water heaters & tanks. Locke# E0300 E0301 E0302 E0303 Model # T-5 T-12 ST-25V ST-30V Capacity 2.0gal 4.4gal 10.3gal 14.0gal Maximum Accept Factor 0.45 0.73 1.00 0.81 System Connection ¾" Brass ¾" Brass 1" Stainless 1" Stainless A Height 12 s " 15" 19¾" 23 d " B Diameter 8" 11" 15 a " 15 a " Weight 5lb 9lb 23lb 25lb Locke# E0300 T-5 2.0gal. Expansion tank E0301 T-12 4.4gal. Expansion tank E0302 ST-25V 10.3gal. Expansion tank E0303 ST-30V 14.0gal. Expansion tank

E0676

E0678

E1145

E1165

E1166

AQUASTAT KIT

With clip on mount, shielded wire, with PVC jacketed cable.

E0313

595926 Comfort Valve

Locke# E0297

595443 ½" for 5/8" OD system piping 85° F -105° F 595444 ¾" for 7/8" OD system piping 85° F -105° F 595656 ½" for 5/8" OD system piping 105° F -115° F 595657 ¾" for 7/8" OD system piping 105° F -115° F

E0298

E0321

E0322

Main Office: 405-631-9701

242

Fax: 405-631-0585