2014 Locke Supply Co.

WATER CLOSETS WITH MACERATING PUMPS

Self contained toilet with the macerator pump and an electrical activated flushing action built inside the unit. This modern shaped self-contained china toilet uses just 1.1 gallons of water per flush. It

The Saniplus is a system that is used to install a complete bathroom up to 12 feet below the sewer line, or even up to 150 feet away from a soil stack. The Saniplus can handle up to four fixtures, toilet, hand basin, shower and bathtub. The Saniplus is simple to install; there are just four connections. The inside of the Saniplus comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. When the flush is activated, the water flowing into the Saniplus activates a micro-switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A common spindle drives the impeller and the macerator blades.

MACERATING PUMP KIT

C

| CLOSETS

is a space saver. In addition to the toilet waste, SANICOMPACT 48 will also discharge wastewater of a sink. 1 inch discharge pipe. 7 PSI pump. Locke# C3014 048 Sanicompact Toilet

4HP GRAY WATER PUMP

REAR DISCHARGE CLOSET

Besides it sleek, modern styling, Saniplus gives you the satisfaction of being environmentally friendly. The Saniplus unit requires just 1.6 U.S gals (6 liters) of water per flush, less than a 1/3 of what most conventional toilets require. Great styling. Ease of installation. And water conservation to boot. All good reasons to choose Saniplus for your next

Flow rate at max head USG / MIN Vertical Discharge Horizontal Discharge

16 ft: 18 usg/ min;3 ft: 29 usg

16 ft

bathroom renovation. • Dimensions in inches H12 x W 21 x D 9 • Dimensions in cm H 30 x W 53 x D 23 • Dimensions include Pump only

150 ft

Locke# C3015 008

HD Gray Water Pump

• Motor Induction • Amperage 4.5 • Voltage 110 • HP .4 • Head feet 12 • Head meters 4 • Volume g/m 7.35 • Volume l /m 27

The Saniplus unit requires just 1.6 U.S gals of water per flush, less than a 1/3 of what most conventional toilets require. Great styling. Ease of installation. And water conservation to boot. All good reasons to choose Saniplus for your next bathroom renovation. This closet is available only in white . The seat is NOT included. This closet uses standard FluidMaster 400 ballcock and flapper valve. Locke# C3011 007 Elongated Bowl C3012 005 Tank for C3011

3HP GRAY WATER PUMP

• Size discharge (inch) 3/4 • Maximum temp. F 104° • Maximum temp. C 40° Locke# C3010 002

Flow rate at max head USG / MIN Vertical Discharge Horizontal Discharge

14 ft: 18 gal/min; 3ft: 24 gal/min

Macerating Pump Kit

C3013

030 Extension Pipe for locating the pump behind a wall

14 ft

140 ft

Locke# C3016 021

Gray Water Pump

Credit: 405-631-9756

147

www.lockesupply.com