2014 Locke Supply Co.

DRILL BITS

3 PIECE MASONRY BIT SET Carbide tip aggressively penetrates surfaces Set includes: 5/32"; 3/16"; and ¼" Bits

REPLACEABLE-TIP STEP DRILL BITS

44 MAGNUM™ SERIES CARBIDE DRILLING BITS SDS SHANK Multi-faceted carbide insert reduces the breakage possibility when drilling through re-bar and mesh. The distinctive chisel shaped tip breaks concrete quickly for faster penetration. The shaft has improved dust removal for less bending stresses. Locke# T1936 48-20-7411 3/16" x 6" carbide T1937 48-20-7431 1/4" x 6" carbide T1938 48-20-7451 3/8" x 6" carbide T1939 48-20-7461 7/16" x 6" carbide T1940 48-20-7471 1/2" x 6" carbide T1941 48-20-7075 7/8" x 12" carbide

Locke# T0859

DW2571 3 Pc. Masonry Bits

• No need to buy a new bit when just the tip is worn • Cooler running, low torque tri-point construction Locke# T1800 RTTP6010 ¼- d " Step Bit T1801 RTTP6020 ¼-1 8 " Step Bit T1802 RTTP6030 ¼-1 a " Step Bit T1803 RTTP6040 ¼- d " & ¼-1 8 " Bits T1804 RTTP6000 2 Pack Of Tips

HAMMERDRILL BITS

• Drills up to 2X MORE HOLES than conventional percussion bits • Drills 50% more holes per charge with cordless hammerdrills Locke# T0843 DW5225 ¼" x 4" x 6" Bit T0844 DW5230 a " x 4" x 6" Bit T0845 DW5235 ½" x 4" x 6" Bit

FLEX DRILLS™

Auger style bit. GB Flexdrills drill holes & fish wire inside existing walls quickly & easily. Bit diameters from ½"- 1", shaft lengths 54" & 72".

UNIBIT STEP-DRILL BITS

CONCRETE & MASONRY DRILL BITS, SDS SHANK

Locke# T4861

T0468

T0469

T0471

FD5412A ½" Flexdrill 54" Long FD7212A ½" Flexdrill 72" Long FD5434A ¾" Flexdrill 54" Long FD7234A ¾" Flexdrill 72" Long FD7000 Placement Tool

T4862 T4863 T4864 T4865

Any one of the Klein-Unibit stepdrill bits cuts several different hole sizes. Each bit drills multiple-size round holes in metal and other materials, and automatically deburrs each by the next succeeding step. Locke# T0468 59001 For 13 sizes in Q " steps; 8 " to ½" T0469 59003 For 9 sizes in z " steps; ¼" to ¾" T0471 59014 For 12 sizes in z " steps; x " to d "

Locke# T0904

DOUBLE END DRILL BITS For use on sheet metal

DW5417 ¼" Carbide SDS Bit

T0905 T0906

DW5427

a " Carbide SDS Bit

DW5437 ½" Carbide SDS Bit

Locke# T1199

T

DE18

8 " Bit, 12 per pack

T1200

DE30 #30 Bit, 12 per pack

c " MASONRY DRILL BIT

| TOOLS

Locke# T0941

VARI-BIT STEP DRILL

MASONRY BITS Alloy steel for strength. Shallow precision machined flutes, carbide tip, drills masonry, brick, plaster and slate. Wide, spiral flutes lift dust out of hole. Bit cuts at maximum efficiency without clogging. Bits may be re- sharpened on bench grinder using silicone carbide grinding wheel. Locke# T0940 16736 ¼"x6" Masonry bits T0942 16739 ½"x6" Masonry bits

MD3

c " Masonry Drill Bit

Cuts many sizes with the same bit. Any material, even stainless steel! Locke# T0776 VB8 x " - d " Vari-Bit T0830 VB12 d " - 1 a " Vari-Bit

x " MASONRY DRILL BIT Use with Tapcon screws.

Locke# T4020

BFR-11 x " Masonry Drill Bit

Mai„ Offic: 405-631-9701

1022

Fax: 405-631-0585