2012 Catalog

First page Previous page 64 Next page Last page

DOVETAIL FORM TOOL HOLDERS FOR DAVENPORT DOVETAIL FORM TOOL ADAPTERS FOR CNC

1st POSITION 12° DOVETAIL TOOL HOLDER FOR DAVENPORT

1st POSITION DOVETAIL TOOL HOLDER PARTS

PART. NO.

CAT. NO. DTH-DAV-1 DTH-DAV-2 DTH-DAV-3

1. PLATE 2. BODY 3. STUD 4. CLAMP

Cat. No. DTH-Dav

See page 16 for Standard Dovetail Form Blanks to fit these and other holders. 2nd POSITION DOVETAIL TOOL HOLDER PARTS DTH-DAV-4 5. CLAMP SCREW DTH-DAV-5 6. STUD SCREW TT00-13 7. PIVOT PIN CTP2-10 8. BOLT 00TPB-4 9. NUT & WASHER 00TBN DTH-DVB-2 3. TOP PLATE DTH-DVB-3 4. CLAMP DTH0-2 5. STUD DTH-DAV-3 6. STUD SCREW TH000-3 7. PIVOT PIN DTH-DVB-7 8. CLAMP SCREW DTH2-7 9. COVER SCREW TC0BH00-SCR 10. JACK SCREW DTH-DVB-10 11. CAP SCREW DTH-DVB-11 12. SQUARE NUT DTH-DVB-12 Part No. 1. PLATE 2. BODY Cat. No. DTH-DVB-1

• Extended outboard support eliminates tearing out of “T” slot of slide. • Permits heavier cuts without chatter. • Eccentric stud and pin adjustment to correct part taper. • Support fits freely under oversize spindle. FOR 2nd POSITION 12° DAVENPORT SLIDE • Permits heavier cuts without chatter.

Cat. No. DTH-DVB

• Eccentric stud and pin adjustment to correct part taper.

See page 16 for Standard Dovetail Form Blanks to fit these and other holders.

1st posItion 10° dovetail tool holder for davenport

1st posItion 10° dovetail tool holder for davenport

TOOL HOLDERS S.S. COLLET CHUCKS

• 2-Bolt • Designed for heavy cuts • 10° Face Angle • First Position

• 1-Bolt • 10° Face Angle • First Position

Cat. No. 3060-sa-SOMMA

Cat. No. 3060-10-sa-SOMMA

For Dovetail Blanks see page 16

For Dovetail Blanks see page 16

DOVETAIL FORM TOOL ADAPTER FOR TURRET LATHES AND CNC LATHES These Holders are designed to hold standard Dovetail Blanks in the flat tool post or square tool post of all Turret Lathes and CNC Lathes.

CAT. NO. A B D/T C D E F .75TLDTH 3/4 SQ. 3-1/2 .6995 1/4 1-1/4 1-1/4 1-1/4 1.0TLDTH 1" SQ. 4" .951 1/4 1-3/4 1-1/2 1-1/2 1.25TLDTH 1-1/4 SQ. 4-1/2 .951 1/4 1-3/4 1-1/2 1-1/2 1.882TLDTH 1-1/4 SQ. 4-1/2 1.882 17/32 2" 3" 2"

DOVETAIL FORM TOOL ADAPTER PARTS

.75TLDTH 1.0TLDTH 1.25TLDTH 1.882TLDTH

FOR

Part No. Cat. No.

Cat. No.

Cat. No.

Cat. No.

CNC LATHES TOO!

1. Body .75TLDTH-1 1.0TLDTH-1 1.25TLDTH-1 1.882TLDTH-1 2. Clamp .75TLDTH-2 1.0TLDTH-2 1.0TLDTH-2 1.882TLDTH-2 3. Clamp Scr. DTH2-7 DTH2-7 1.25TLDTH-3 1.25TLDTH-3

See page 16 for Standard Dovetail Blanks to fit these holders.

64

SWISS

CNC

MULTI- SPINDLE

BROWN & SHARPE

DAVENPORT

Made with