2012 Catalog

RESHARPENABLE QUICK-CHANGE TOOLING SYSTEMS

RESHARPENABLE QUICK CHANGE INSERT SHANK TYPE TOOL HOLDERS

• Replaces full length H.S.S. toolbits • Replaces brazed on type carbide tools (Patent No. 5,345,846)

W/ COOLANT

G

COOLANT

QUICK CHANGE FORM / SHAVE

CAT. NO. RQC-312

ATTACHMENT H A B C D E F INSERT SIZE ATTACHMENT ONLY

- -

--

1/2 5/8 1-1/4 5/16 3/8 1-1/4 --

5/16 X 5/16

SEE PAGE 12 FOR INSERT BLANKS.

RQC00-1/2 RQC00-1/2-CS 1/2 1/2 1-3/32 5/16 13/32 1-3/8 1/8 3/4 X 5/16 RQC00-5/8 RQC00-5/8-CS 5/8 5/8 1-3/32 5/16 13/32 1-3/8 1/16 3/4 X 5/16 RQC00-3/4 RQC00-3/4-CS 3/4 3/4 1-3/32 5/16 13/32 1-3/8 -- 3/4 X 5/16 RQC-5/8 RQC-5/8-CS 5/8 5/8 1-5/8 1/2 1/2 1-15/16 5/16 1-1/4 X 3/8 RQC-3/4 RQC-3/4-CS 3/4 3/4 1-5/8 1/2 1/2 1-15/16 1/4 1-1/4 X 3/8 RQC-1.0 RQC-1.0-CS 1" 1" 1-5/8 1/2 1/2 1-15/16 1/8 1-1/4 X 3/8 RQC-1.0-W RQC-1.0-W-CS 1" 1" 1-5/8 1/2 1/2 1-15/16 1/8 1-3/4 X 3/8 RQC-1.25 RQC-1.25-CS 1-1/4 1-1/4 1-5/8 1/2 1/2 1-15/16 -- 1-1/4 X 3/8 RQC-1.25-W RQC-1.25-W-CS 1-1/4 1-1/4 1-5/8 1/2 1/2 1-15/16 1/4 1-3/4 X 3/8

RQC5/16-CA

RQC3/8-CA

RESHARPENABLE QUICK CHANGE INSERT GANG TYPE TOOL HOLDERS (Patent No. 5,345,846) • Replaces stick type form tools. • Center height adjustment never has to be reset after sharpening insert. • Machine downtime less than one minute for insert resharpenings or replacement.

R

SEE PAGE 12 FOR INSERT BLANKS.

CAT. NO. SHANK INSERT RQCGT-3/4 3/4" DIA. 1-1/8 X 5/16

RESHARPENABLE QUICK CHANGE INSERT CIRCULAR CUTOFF TOOLS FOR 5TH POSITION DAVENPORT (Patent No. 5,345,846)

• Mounts ON SWING ARM - SAME AS CIRCULAR TOOL. • ONCE HOLDER IS SET ON CENTER NEVER NEEDS TO BE RESET. • INSERTS ARE RESHARPENABLE 10 TO 15 TIMES (1/8"). • resharpening fixture available - see page 13.

• INSERTS ALWAYS RETURN TO ORIGINAL DIAMETER AND LENGTH SETTINGS. • INSERTS CAN BE CHANGED IN LESS THAN A MINUTE. • INSERTS AVAILABLE TO FULL DIAMETER CAPACITY OF MACHINE.

BLADE CLOSE TO PICKOFF COLLET MICRO-GRAIN CARBIDE INSERTS

CUTOFF BLADE BLANKS FOR REWORKING TO YOUR REQUIREMENTS. GROUND HEIGHT, WIDTH & LENGTH

CAT. NO.

STYLE W*

D

RQCT-047-0 RQCT-063-0 RQCT-078-0 RQCT-094-0 RQCT-125-0 CAT. NO. RQCT-047 RQCT-063 RQCT-078 RQCT-094

A .047 3/16 A .063 5/16 A .391 25/64 A .094 7/16 A .125 9/16

CAT. NO. RQCT-MIC

MICROGRAIN CARBIDE 76PM HIGH SPEED STEEL

BLADE CLOSE TO SPINDLE

RQCT-A

STYLE W*

D

B .047 3/16 B .063 5/16 B .391 25/64 B .094 7/16

Cat. No. RQCDAV-CO

• PRICES ON APPLICATION FOR WIDER INSERTS FOR PICKOFF COLLET FORM AND CUTOFF WORK.

STYLE "A"

STYLE "B"

• NOTE: CUTOFF WIDTH WILL BE REDUCED UP TO .001" PER SIDE (.002" TOTAL) AS INSERT IS RESHARPENED.

RESHARPENABLE QUICK CHANGE INSERT SHANK TYPE CUTOFF BLADE HOLDERS (Patent No. 5,345,846) Uses same inserts as Davenport Holder shown above. Inserts Resharpenable 10-15 times (1/8").

CAT. NO.

A

RQC-.75-CO RQC-.50-CO 1/2" RQCGM20-CO 20MM 3/4"

11

SWISS

CNC

MULTI- SPINDLE

BROWN & SHARPE

DAVENPORT